708699
51
Zoom out
Zoom in
Previous page
1/77
Next page
II. AUTOMATIC VACUUMING AND SEALING A FILLED BAG:
FUNCTION VACUUM & SEAL (A)
1. Open the appliance cover
by pulling up the left
and right release button in the case the appliance
cover is locked shut.
2. Place the fresh food into the bag. Please use the
original Solis vacuum bags or vacuum foil exclusively
to avoid damage to the appliance and to ensure best
results.
For item-numbers and descriptions, please read the
enclosed order form. You can purchase accessories
for your vacuum sealer in good stores or you get
them from Solis. You can find the contact addresses
at the end of this manual.
3. Clean the open end of the bag inside and out,
then smooth it flat. The end must be free of dust
and wrinkles.
4. Place the open bag end in the vacuum chamber
.
CAUTION: The air-extraction opening
must not be
covered by the bag end (see Fig. 6)!
5. Push the cover down by firmly pressing down on
both front corners of the appliance cover with both
hands until you hear a „Click“ from both sides. Now
the cover is locked in at both sides.
(see Fig. 7).
CAUTION: Never press the release buttons to close
the cover. Their only purpose is opening the cover.
6. Then press the Vacuum & Seal (A) button, now the
appliance will vacuum and seal the bag automatically
(see Fig. 8). During the extraction process, the blue
control light flashes. The green light by Seal will
start flashing additionally once the sealing process is
started.
I. SEALING A BAG FROM
VACUUM FILM
1. Cut a suitable bag length from the film.
(see Fig. 1)
2. Open the appliance cover
by pulling up the left
and right release button in the case the appliance
cover is locked shut.
3. Place the open bag end on the sealing bar
¥ of the
open appliance. The bag end should not extend into
the vacuum chamber
.
(see Fig. 2)
4. Close the cover and push down on the two front
corners of the appliance cover until you hear a
„Click“ from both sides. The cover is now locked
on both sides.
(see Fig. 3)
CAUTION: Never press the release buttons to close
the cover. Their only purpose is opening the cover.
5. Press the Seal (C) button in order to seal the end
of the bag. The green indicator light flashes several
times and goes out again when the sealing process
is finished.
(see Fig. 4)
6. Once the green indicator light goes out, pull up both
release buttons to open the cover.
(see Fig. 5)
7. Remove the bag with the sealed end.
8. Check if the seal seam is straight and without
creases. Should this not be the case, cut the seal
seam off and repeat the process.
100 101
Fig. 2
Fig. 1
Fig. 3
Fig. 4
Fig. 5
Fig. 10
Fig. 6
Fig. 7
Fig. 8
Fig. 9
51


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Solis Vac Quick - 576 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Solis Vac Quick - 576 in the language / languages: English, German, Dutch, French, Italian as an attachment in your email.

The manual is 1,63 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info