535622
18
Zoom out
Zoom in
Previous page
1/20
Next page
E
18
PROG.:
Your appliance is equipped with a
function permitting operation that ensure
automatic starting and stopping.
The programming steps for «
PROG
» are as
follows:
1. Long press the «
PROG
» button to start
the programming, you can see the time
and «PROG» message flash.
2. Press the «+» or «–» buttons to set the
start time you desire.
3. Long press the timer button to set stop
time, you can see the time message
flash.
4. Press the «+» or «–» buttons to set the
stop time you desire.
5. Validating the stop time by pressing
«
TIMER
» button again.
6. You can set the above mentioned ope
-
ration mode and oscillation function by
pressing «
MODE
» button and «
OSC
»
button if you would like.
7. Validating the start time and program
-
ming chosen by pressing «PROG»
button, then the fan of the appliance
and oscillation function (if chosen) will
stop after 30 seconds, the «PROG»
function is now active, all the sets will
show (except «OSC» function)in the
display, the appliance will start and stop
automatically according to the program
-
ming you have selected
NOTE: You cannot change the sets after
step no. 7 unless long press «
PROG
»
button.
When the PROG function is active you can
carry out the following operations:
Adding or modifying program-
med function:
Use the same method
as for the 1
st
programming (Starting the
programming step no. 1 above).
Cancelling the start time and stop
time:
Short press the button,
the start time and stop time will be
cancelled, the appliance is again in
manual mode.
Cancelling all the programmed
operations at once:
Press the power
switch knob for more than 1 minute.
How to clean the filter
The filters need regular cleaning
(once 1 week), following the steps below :
1. Unscrew the 1 screws which fix the
filters on the back of the heater.
2. Remove the filter according to the
arrow direction, and clean them.
3. After cleaning, follow the above
instructions in reverse order to assemble
the filters.
CAUTION:
Do not assemble the filter before
it is dry. Do not use the appliance
without its filter.
Screws
18


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Solis Type 704 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Solis Type 704 in the language / languages: English, German, French, Italian as an attachment in your email.

The manual is 1,58 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info