484736
29
Zoom out
Zoom in
Previous page
1/42
Next page
29
USING THE KETTLE
If you are using the kettle for the first time, or after a long interval, please fill it with water up to the
«MAX» mark and bring it to the boil. Pour the water away, refill the kettle with water and bring it to the
boil again, so that any particles of dirt that may be present inside the kettle are removed. Do not drink
this water.
1. Opening the lid
When you press the button integrated into the handle, the lid will open automatically.
2. Filling with water.
Take the kettle off the base station to fill. When you fill it with water, make sure that the level does not
fall below the «MIN» mark or rise above the «MAX» mark. Close the lid and place the kettle back on the
base station.
3. Temperature display
Once the water jug is placed on the base station and the plug is connected to the mains electricity supply,
the letter «C» will blink in the display. This means that the temperature will be indicated in degrees Celsius.
After a short time, the water temperature will appear on the display in degrees Celsius. If the appliance is
plugged in when the water jug is not on the base station, the letter «E» will appear in the display.
4. Modes of operation
ON/OFF button: if you operate the ON/OFF-switch in the normal Standby mode, the water will heat up
until it reaches 100° C. The kettle will then switch off automatically. An acoustic signal indicates the end
of the boiling process.
If you press the ON/OFF button while the kettle is heating up, the appliance will return to the Standby mode.
PROGRAM button: Press the PROGRAM button to change the temperature setting in any operating
mode. You can choose between the following temperatures:
40° C indicated by the illuminated spot in the top left hand corner of the display
60° C indicated by the illuminated spot in the top centre of the display
80° C indicated by the illuminated spot in the top right hand corner of the display
90° C indicated by the illuminated spot in the bottom right hand corner of the display
100° C indicated by the illuminated spot in the bottom centre of the display
Keep warm indicated by the illuminated spot in the bottom left hand corner of the display
The corresponding temperature will also be indicated in the display, depending on the selected programme.
After 3 seconds, the display will show the current temperature. After selecting the programme, press
the ON/OFF to start heating the water. The illuminated LED spot indicates the relevant programme and
you will be able to read the current water temperature off the display. The appliance will then switch off
completely when the water has reached the set temperature (except in the case of the “Keep warm”
programme).
After the kettle has switched off, the LED light on the display will flash on the selected programme. When
you press the ON/OFF button again, the LED point lights on the selected programme until you change it.
Solis_DigitalKettle-Betriebsanleitung.indd 29 16.02.11 18:01
29


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Solis TIPO 558 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Solis TIPO 558 in the language / languages: English, German, Dutch, French, Italian as an attachment in your email.

The manual is 4,12 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info