506312

Solis Prestige Blender Type 837 Manual

48
Zoom out
Zoom in
Previous page
1/56
Next page
E
36
• Fully unwind the cord before use.
• To protect against electric shock, do not
immerse the cord, plug or motor base in water
or any other liquid.
• Do not allow the cord to hang over the edge of
a table or counter, touch hot surfaces or become
knotted.
• This appliance is not intended for use by young
children or infirm persons unless they have been
adequately supervised by a responsible person
to ensure they can use the appliance safely.
• Young children should be supervised to ensure
that they do not play with the appliance.
• I t is recommended to regularly inspect the
appliance. Do not use the appliance if the power
supply cord, plug or appliance becomes dam
-
aged in any way. Return the entire appliance to
the nearest authorised Solis Service Centre for
examination and/or repair.
• Any maintenance other than cleaning should be
performed at an authorised Solis Service Centre.
• This appliance is for household use only. Do not
use this appliance for anything other than its
intended use. Do not use in moving vehicles or
boats. Do not use outdoors.
• The installation of a residual current device
(safety switch) is recommended to provide
additional safety protection when using electrical
appliances. It is advisable that a safety switch
with a rated residual operating current not
exceeding 30mA be installed in the electrical
circuit supplying the appliance. See your electri
-
cian for professional advice.
IMPORTANT SAFEGUARDS FOR ALL ELECTRICAL APPLIANCES
Before first use
Before using your Solis Prestige Blender for the
first time, remove any packaging material and
promotional labels. Ensure the appliance is
switched off at the power outlet and the power
cord is unplugged.
Wash the lid, inner lid, blender jug and blade
assembly (refer to Disassembling the blender jug
on Page 38) in warm, soapy water with a soft cloth.
Rinse and dry thoroughly. The motor base can be
wiped with a damp cloth. Dry thoroughly.
•
When using your Solis Prestige Blender for the
first time, you may notice an odour coming
from the motor. This is normal and will dissipate
with use.
•
The blending blades are extremely sharp. Avoid
any contact with fingers and hands.
Assembling and attaching the blender
Step 1.
Place the motor base on a flat, dry surface such
as a bench top. Ensure that the motor base is
switched off at the power outlet and the power
cord is unplugged.
Step 2.
To reassemble the blender jug, replace the silicon
seal onto the blade assembly (see Page 39 - Fig 1).
Upturn the blender jug and insert the blade
assembly into the jug base (see Page 39 - Fig 2).
Twist the Blade Removal System anticlockwise until
firmly locked into position.
Step 3.
Turn the blender jug upright and insert on to the
motor base. The handle of the blender jug can
be positioned to the left or right hand side of the
appliance.
Step 4.
Add food or liquid into the blender jug ensuring
not to exceed the ‘MAX’ mark. Place the blender lid
firmly into position on the top of the blender jug.
Insert the clear inner lid into the blender lid and
turn clockwise to lock into position. (see Fig 1)
When adding oil or other liquids during opera-
tion, turn the lid to the unlocked position and
pour through the small holes on either side of the
inner lid (see indents for finger placement Fig. 1.)
OPERATING YOUR SOLIS PRESTIGE BLENDER
Do not operate the Blender
continuously on heavy loads
for more than 30 seconds.
… 48 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Solis Prestige Blender Type 837 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Solis Prestige Blender Type 837 in the language / languages: English, German, Dutch, French, Italian as an attachment in your email.

The manual is 0,71 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info