708780

Solis Power Blender To Go - 8325 Manual

58
Zoom out
Zoom in
Previous page
1/64
Next page
58
▲
GRINDING WITH THE
GRINDING CONTAINER
1. Fill the open stainless steel grinding container with dry foods like seeds, nuts etc.
In any case, pay attention to the MAX marking in the container and do not over-
fill it!
2. Screw the blade base back onto the grinding container by giving it a quarter turn
in a clockwise direction. The blade base must be screwed on all the way to pre-
vent the contents from escaping.
Caution: The blender will only blend if the motor base has been correctly
screwed onto the grinding container. This will unlock the safety switch.
3. Place the grinding container in the motor base with the blade base facing
downwards. The arrow on the blade base should line up with the arrow on the
motor base.
4. Plug the power plug into a suitable power socket.
5. Turn the grinding container with the blade base in a clockwise direction to the
LIQUIFY position and blend for a maximum of 30 seconds resp. even shorter, until
the desired consistency has been reached. Then, turn the grinding container with
the blade base in a counter-clockwise direction until both arrows are lined up
again (OFF position). The motor stops. If you want to keep grinding, you have
to allow the motor to cool down for 30 seconds in any case. The stainless steel
grinding container needs the same amount of time to cool down. Caution: Blend
for a maximum of 30 seconds, then let the motor cool down for 30 seconds.
6. You can grind continually (position LIQUIFY) or use the PULSE function. To do
that, repeatedly turn the grinding container to the LIQUIFY position and back to
the OFF position (both arrows line up). Repeat this multiple times and the
motor is switched on and off at short intervals.
7. Once the grinding process has been finished, turn the grinding container to the
OFF position. Wait a few seconds for the blades and the motor to come to a full
stop and pull the power plug. If the grinding container has heated up, touch the
blade base instead of the grinding container to unscrew it. Remove the grind-
ing container from the motor base, turn the container upside down and unscrew
the blade base from the container in a counter-clockwise direction. Caution: The
grinding container might have heated up in the grinding process.
If the blender is not in use or before it is disassembled, cleaned or stored, it always
has to be unplugged.
SOLIS Power Blender TO GO-E_2016 27.06.16 17:39 Seite 58
… 58 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Solis Power Blender To Go - 8325 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Solis Power Blender To Go - 8325 in the language / languages: English, German, French as an attachment in your email.

The manual is 1,22 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Solis Power Blender To Go - 8325

Solis Power Blender To Go - 8325 User Manual - Dutch - 22 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info