708803

Solis Perfect Pro Slim - 8327 Manual

42
Zoom out
Zoom in
Previous page
1/57
Next page
GB GB
8382
STARTING UP
Place the motor base on a solid, even, dry, stable and moisture resistant work
surface.
Choose a suitable blending vessel.
When using the blender jug, screw the blade base onto the lower part of the
blender jug.
Fill the blender jug / blender container with the foods resp. the liquid. Always
pour the liquid ingredients into the vessel first, followed by the softer ingredi-
ents. Always add the solid or frozen ingredients resp. ice cubes to the vessel last.
Close the blender vessel:
Close the blender jug with the lid, making sure that the spout is covered by
the lid. Then, place the measuring cup in the lid so that both nibs glide into the
recesses. Fasten the measuring cup by turning it in a clockwise direction (towards
“lock”) until it locks into place.
Caution: If the measuring cup is not turned all the way in, the jug contents
might splash out!
If you want to use the blender containers for blending, screw the blade base
firmly onto the container.
Place the blender jug / blender container on the motor base so that the grey nib
on the edge of the vessel glides into the recess and the drive screw of the blade
base is properly connected to the motor clutch.
Fully unwind the power cord and connect the power plug to a suitable power
outlet: a long signal sound and the symbol for the blender vessel placed on the
appliance lights up in the display, along with the “vegetable” program.
Note: The appliance can identify the blender jug or one of the two blender con-
tainers thanks to magnets installed into the vessels. The corresponding symbol
lights up in the display:
Blender jug Blender container 600 ml or 400 ml
CHOOSING A PROGRAM
You can now choose one of the following programs:
If the blender jug is placed on the motor base:
vegetable, smoothies, masher, sauce, clean
If one of the blender container is placed on the motor base:
vegetable, smoothies, sauce, clean
Note: With a blender container on the motor base, the “masher” program
(mashing / pureeing) cannot be selected.
Once the appliance is plugged in or you press the Power button while the
appliance is in standby mode, the standard setting “vegetable” lights up in the
display.
If you want to select a different program, press the + or − button. Each press of
the button switches the display to the next program.
When the right program lights up in the display, you can decide whether you
want to blend in the pre-set program or if you want to manually modify this
pre-set program.
1. SELECTING A PRE-SET PROGRAM:
Once the desired program lights up, e.g. “vegetable”, press the Power button,
the appliance runs the pre-set blending program. The display states the speed
and a time indicator. Once the program has terminated, a check mark lights up
and a signal sounds.
2. MANUALLY MODIFYING A PROGRAM:
You can change every pre-set program by changing the blending speed and/or
the blending time. To do that, proceed as follows:
Once the desired program (e.g. “smoothies”) has been selected with the + and
− buttons and lights up in the display, press the mode button. The display states
“Time” and the standard settings “60 sec” by the blender jug and “30 sec” by
the blender containers.
… 42 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Solis Perfect Pro Slim - 8327 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Solis Perfect Pro Slim - 8327 in the language / languages: English, German, Dutch, French, Italian as an attachment in your email.

The manual is 1,46 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info