SOLIS MASTER 5000 DIGITAL User’s manual
62
5.0 Making hot water
for tea, soups etc.
5.1 When the appliance is ready for use, place a
glass or cup directly under the steam and hot
water nozzle and slowly open the steam/hot wa-
ter knob. Hot water will automatically be dis-
pensed. To stop the flow of water, close the
steam/hot water knob.
6.0 Making steam
To heat milk or other beverages and to make
cappuccino.
6.1 When the appliance is ready for use,
press steam selection button (21) and wait
until the
SSTTEEAAMM......RREEAADDYY FFOORR UUSSEE
indicator appears.
6.2 Open the steam knob very slightly and
allow the condensation to exit into the drip tray.
Afterwards, immerse the swivel steam nozzle
into the liquid to be heated. Slowly open the
steam knob completely and heat the liquid, using
a circular movement from bottom to top.
.
6.3 If no further steam is required, slowly
close the steam knob and move the steam
nozzle to the original position on the drip tray and
switch off steam selection button (21).
Note: It is advisable to clean the steam nozzle
with a damp cloth immediately after use.
Important: The steam nozzle will be extremely
hot after delivery of hot water or steam. Avoid di-
rect skin contact – danger of burns!
6.4 With the steam selection button (21)
switched off, open the steam knob again –
indicator
HHOOTT WWAATTEERR ........OOVVEERRTTEEMM--
PPEERRAATTUURREE
appears – and prime the ma-
chine until a steady stream of water flows
from the nozzle and only the
HHOOTT WWAATTEERR
indicator appears (without Overtempera-
ture).
Close the steam/hot water knob. The machine is now again ready to brew coffee.
Important: After producing steam, it is imperative to prime/cool down
the machine (see also Pt. 3.5 ). Otherwise, the machine will block and the
OOVVEERRTTEEMMPPEERRAATTUURREE
indicator will appear.
