488981
6
Zoom out
Zoom in
Previous page
1/6
Next page
Important instructions
The SOLIS coffee grinder is preset to the
medium grinding postition.
Always keep the lid (1) of the bean container
tightly shut in order to enjoy the full taste
and aroma of your coffee beans. Never grind
more coffee than you actually need.
Quantity Control
The SOLIS coffee grinder is equipped with a
time control (8). Use it to set the coffee
grinder to the desired grinding time and
quantity. The appliance switches off
automatically once the preset time has
elapsed. If you want to interrupt grinding
before the preset time has elapsed, simply
turn the rotary knob back to the left until the
appliance switches off.
The quantity of ground coffee you need to
make your coffee depends on the type of
bean, the degree of grinding and your
personal taste.
Front-mounted Microswitch
Push in button and hold to grind. The machine
will grind as long as you depress the button.
The grinder shuts off when you release the
button (fig. 9).
Warning:
After each unit (10 cups), empty the coffee
container (7). This prevents the motor
overheating.
Stone safety cut-out feature
Given the huge quantities of coffee that are
packed every day, very small stones may
accidentally find their way into even the
finest coffee beans. The appliance is
equipped with a stone safety cut-out
("friction clutch") in order to prevent
damage to the grinding gear. A stone in the
grinding gear will cause a loud rattling noise.
Switch the appliance off immediately,
remove plug from wall outlet, open it as
described in the section entitled
"Cleaning the grinding gear" and remove
the stone.
Cleaning the grinding gear
Disconnect the mains plug from the socket
outlet. Remove any remaining beans in the
bean container (fig. 6) and take the latter off
by twisting it in an anticlockwise direction as
far as the release area stop (fig. 7). Lift the
bean hopper from the housing (fig. 8). The
grinding ring can then be lifted out of the
machine.
A soft-bristle brush is ideal for cleaning the
grinding gear. Re-assemble the machine by
performing the above operation in reverse
order. Housing and transparent parts can be
cleaned easily using a damp cloth.
SOLIS MAESTRO
11
Before using
Please read the information below very
carefully. It contains important tips for the
use, the safety and the maintenance/care of
this appliance. Please keep these operating
instructions for subsequent reference.
General information
Do not plug the appliance in before
checking that the voltage indicated on the
rating plate is the same as the mains
electricity supply voltage.
Clean the appliance with a dry or slightly
damp cloth only.
Repairs are to be performed only by
authorized service offices (e.g. SOLIS
customer service). Inexpertly repaired
appliances are a source of risk to the user.
Solis will not accept any liability for
damage or injury if the appliance is used
other than for its intended purpose or is
improperly operated or inexpertly repaired.
All guarantee claims will be void.
Safety information
Do not use the appliance if the power
cable is defective.
Never remove the plug from the power
supply socket with wet hands, or by
pulling on the power supply cord.
Children cannot always recognize the
dangers of using electrical equipment.
Therefore, never leave them alone and
unsupervised with electrical appliances.
Do not immerse the appliance in water.
Caution: Always unplug the mains supply
cord prior to cleaning the appliance.
Initial Operation
Place the appliance on a level surface.
Unreel the required length of cord. It is
important to keep the cord short. Insert
the cord into the power cord inlet provided
so that it is clamped and insert the plug into
the socket outlet. Pack the excess cord
length in the cord-tidy (fig. 1). Open the lid
of the bean container (fig. 2), fill the bean
container with the desired quantity of coffee
beans (250 g max.) (fig. 3) and close the lid
(fig. 4). The appliance is now ready to
operate.
Setting the grinding control
The main adjustment positions stated on the
control for the degree of grinding are
normally sufficient. The degree of grinding
can be adjusted by twisting the bean
container (fig. 5).
= fine grinding (e.g. for espresso coffee
machines)
= medium grinding (e.g. for filter coffee
machines)
= coarse grinding
If the three adjustment positions do not
precisely match your personal taste you can
also grind your coffee by choosing any
intermediate position.
If the appliance has been filled with
coffee beans, the grinding control must
only be operated when the motor is
running.
Operating instructions
10
6


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Solis Maestro at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Solis Maestro in the language / languages: English, German, French, Italian as an attachment in your email.

The manual is 0,41 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info