Manual Solis EasyDry Type 708 (page 30 of 32) (English, German, French, Italian)

535732

Zoom out

Zoom in

1/32

When the water tank is full, the unit will switch off

automatically and beep 15 times, the LED [1] of

water tank full on the control panel will light up.

The tank needs to be emptied:

• Lightly press on the sides of the tank with both

hands and pull out gently.

• After discarding the water, gently push the tank

back into its place. The LED light will go off.

Warning:

1. Do not remove the ﬂoat from the water tank,

the water tank full sensor will no longer be able

to detect the water level correctly without the

ﬂoat and water may leak from the water tank.

2. If the tank is dirty, wash it with cold or lukewarm

water. Do not use detergent, scouring pads, che

mically treated dust cloths, gasoline, benzene,

thinner or other solvents, as these can scratch

and damage the tank and cause water leakage.

3. When replacing the water tank, press the tank

ﬁrmly into place with both hands. If the tank

is not positioned properly, the water tank full

sensor will be activated and the dehumidiﬁer

will not operate.

EMPTYING THE WATER TANK

For the continuous drainage please refer to the

following instructions and the picture.

1. Switch off the unit and remove the plug from

the electrical outlet.

2. Create an opening (remove part A) for the

drainage tube on the tank.

3. Push a drain tube (14 mm outer diameter,

10 mm inner diameter) through the hole and

connect to the continuous drainage port

(part B).

4. Place the other end in a drain. Make sure the

tube is free from twists and bends.

Note:

The water tank has to remain in place during

continuous drainage.

CONTINUOUS DRAINAGE

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Solis EasyDry Type 708 in the language / languages: English, German, French, Italian as an attachment in your email.

The manual is 8,73 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Solis EasyDry Type 708 Manual

Product: