616275
39
Zoom out
Zoom in
Previous page
1/51
Next page
39
s
START-UP
When you have set up the fan in a suitable spot and plugged it in, you can begin
to use the appliance. Once the power plug is connected, the LED display will state
the current room temperature.
Touch the sensor buttons on the control panel or press the function buttons on the
remote control. Every setting (except the operating mode „Normal Wind“) will be
indicated on the control panel resp. on the LED display (Timer).
1. Activate the appliance by pressing the POWER button. The standard set-
ting is: Ventilation programme „Normal Wind“ and ventilation speed LOW.
2. If desired, choose another ventilation programme by pressing the MODE
button. You have three programmes to choose from: „Normal Wind“ (con-
stant), „Natural Wind“ (surging and receding) and „Sleeping Wind“ (soft
wind, surging and receding).
Note: In the „Normal Wind“ standard setting, no symbol will illuminate in the
control panel.
3. If required, use the SPEED button to select another ventilation speed. You
can choose from three speeds: HI, MID and LOW. The standard setting is LOW.
4. If you want to set a certain operation time after which the fan should switch
off automatically, use the TIMER button to set an amount of time between
0.5 and 8 hours. You can increase operation time in steps of 0.5. By pressing
the TIMER button permanently for three seconds, operation time will increase
at steps of 1 hour. The LED display will indicate the chosen amount of hours.
Once the setting is done, meaning you stop pressing the TIMER button, the
display will return to stating the current room temperature after a few seconds
and the symbol will light up in the lower right.
5. If you want to activate the oscillation function, press the SWING button.
The fan will slowly swing from left to right. To deactivate oscillation, press the
SWING button once again.
39


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Solis EASY BREEZY 757 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Solis EASY BREEZY 757 in the language / languages: English, German, Dutch, French, Italian as an attachment in your email.

The manual is 1,04 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info