Manual Solis Blender PRO type 839 (page 42 of 54) (English, German, French)

535742

Zoom out

Zoom in

1/54

Working with the mixer

CAUTION: When processing solid food, do not run the mixer for more than 60 seconds at a time.

1. Add the ingredients to the mixing jug

Important note: Pre-cooked ingredients should cool down before being processed. Liquid ingredients

should be added first if possible. Cut solid ingredients into pieces of about 2 cm in size before adding. Do not

overfill the mixing jug, otherwise the contents could spill over or splash, and the motor could stall.

CAUTION: If you process hot ingredients, please take care not to burn yourself on the mixing jug or lid, or to

scald yourself with steam or splashing liquids. If necessary, place a kitchen cloth over the lid to protect

yourself from splashes or steam.

2. Place the lid on the jug and press it down firmly. Close the center opening in the lid with the transparent

measuring beaker. The measuring beaker has two small guide tongues on both sides, which fit into slots in

the lid. Press the measuring beaker down completely and lock it by turning it clockwise.

3. Hold the lid with one hand and switch on

the appliance with the On/Off switch. (See Fig. 4)

Select the required speed 1 or 2. The motor will

now run.

CAUTION: If the motor stalls inadvertently or runs

unusually slowly, then switch immediately to “0”;

OFF. Otherwise the motor could overheat.

Follow the instructions on pages 45 / 46

(Faultfinding help).

Note: Use the PULSE button for crushing ice or

hard butter. Only press the button for a short pulse

each time, and if necessary repeat.

4. After a few seconds switch to “0” (middle position;

OFF), to switch the appliance OFF.

fig 4

BDA_Blender_Mixer_DE_FR_E.qxd 27.08.2004 9:19 Uhr Seite 40

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Solis Blender PRO type 839 in the language / languages: English, German, French as an attachment in your email.

The manual is 0,97 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Solis Blender PRO type 839 Manual

Product: