708710
58
Zoom out
Zoom in
Previous page
1/83
Next page
115114
GB GB
ESPRESSO MAKING
Make sure that the steam / hot water control (I) is turned off (Off-position, fully
turned counterclockwise).
Plug in the main plug into a power outlet. Press the ON/OFF button. As soon as the
machine is turned on using this button all the buttonframes light up blue for one
second while the machine is pumping water. Afterwards the ON/OFF button
and steam mode button
stay lit, while the buttonframes of “automatic mode”
and “manual mode” keep blinking as long as the machine is preheating. When
the correct temperature is reached these buttons will also constantly light up blue.
The machine is now ready for use.
Coffee extraction in automatic mode with
button
To brew coffee in the 25 second standard setting press the ”automatic mode“ but-
ton
. The machine will first pump water to pre-infuse and then pour freshly brewed
espresso out of the outlet into the cup. The brewing process stops after 25 seconds
and you can take the cup of coffee. During the automatic mode only the ON/OFF
button and the ”automatic mode“ button light up.
NOTE: You can individually change the automatic mode to brew for 10 to 60
seconds. How to do that is explained on page 121 in the chapter ”Settings for
automatic coffee brewing“.
The brewing process in automatic mode can be stopped anytime by pressing the
”automatic mode“ button again.
Coffee extraction in manual mode with
button
If you want to decide every time how strong the coffee shall be or how much you
want, press the ”manual mode“ button
. The machine will first pump water to
pre-infuse and then pour freshly brewed espresso out of the outlet into the cup.
Once there is enough coffee in the cup press the ”manual mode“ button
again
and the brewing process will stop and you can remove the cup.
If you want to brew another cup remove the portafilter, tap the coffee grounds
out of the filter insert and rinse the portafilter clean with clear hot water.
CAUTION: the portafilter and the filter insert are hot! Afterwards dry the filter
insert with a clean towel. The filter insert is now ready for use again.
INSERTING THE PORTAFILTER
Attach the portafilter to the brewing group:
Hold the portafilter under the brewing head so that the handle is located to the
left.
Push the portafilter upwards against the brewing head and turn the handle
counterclockwise to the right until you feel some resistance. The handle will then
roughly be in a 90 ° angle to the machine.
Place one or two empty cups on the drip tray (best pre-warmed by the previous
rinse) under the outlet / the outlets of the portafilter.
58


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Solis Barista Gran Gusto - 1014 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Solis Barista Gran Gusto - 1014 in the language / languages: English, German, Dutch, French, Italian as an attachment in your email.

The manual is 2,1 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info