708877

Solis 8401 - slice and more Manual

32
Zoom out
Zoom in
Previous page
1/42
Next page
GB GB
6362
s
STARTING UP
1. If the appliance is cleaned and completely assembled and placed on a smooth,
dry, stable and moisture resistant work surface, plug the power plug into a
power outlet. Place a bowl under the opening of the cutting drum.
2. Switch the appliance on with the ON/OFF toggle switch, the red function light
in the switch lights up. If you set the switch to the position I, the drum rotates
at a normal speed. If you set the switch to the position II, the drum rotates very
quickly. Fill the funnel with the foods you wish to chop. The foods might need
to be washed, peeled and cut into pieces small enough to fit into the funnel.
Use the tamper to slowly push the foods down the funnel. Do not apply too
much pressure. It suffices to gently push the foods down. Reduce the pressure
if the appliances seizes or the motor spins too slowly. A potential blocking must
only be removed while the appliance is switched off and disconnected from the
power. Use only the tamper to push the foods down the funnel. Never insert
any other objects or even your hand into the funnel!
3. If the foods have been processed but you still have more to chop, take the
tamper out of the funnel and fill it with food. After that, gently push the foods
down with the tamper.
●
Caution: Use only the tamper to push food down the funnel. Never reach into
the funnel with other items or your hands. Risk of appliance damage or injuries!
Also, never remove potential blockings with your hands or kitchen tools! To
remove blockings, always switch the appliance off, pull the plug and wait for the
appliance to come to a full stop. Never reach into the cutting drum to remove
processed foods while the appliance is in use resp. connected to the power and
avoid contact with the sharp cutting blades.
4. When all required foods have been grated resp. chopped, switch the appliance
off with the ON/OFF switch (position 0), wait for the appliance to come to a full
stop and pull the plug.
5. After usage, disassemble the appliance and clean it as described in the chapters
“Disassembling the Multigrater” (see page 63) and “Cleaning and mainte-
nance” (see page 64).
Caution: Never use the appliance while it is empty, meaning without any food in
the funnel.
If you have used the appliance continuously for 2 minutes, you should
definitely take a break of 2 minutes to prevent the motor from over-
heating.
s
DISASSEMBLING THE MULTIGRATER
STEP 1:
●
Switch the appliance off with the ON/OFF toggle switch (position 0), wait for the
cutting drum to come to a complete stop and pull the power plug.
STEP 2:
●
Turn the funnel to the right, towards “OPEN”, to a 1 o'clock position.
q
STEP 3:
●
a) Pull the cutting drum holder out of the motor unit.
b) Pull the cutting drum out of the back of the drum holder.
a) b)
… 32 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Solis 8401 - slice and more at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Solis 8401 - slice and more in the language / languages: English, German, Dutch, French, Italian as an attachment in your email.

The manual is 0,8 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info