708815

Solis 8371 Manual

56
Zoom out
Zoom in
Previous page
1/72
Next page
111110
GB GB
5. REMOVING THE ATTACHMENTS FROM
THE BLENDER SHAFT
●
You have to remove the attachment at the end of the mixing process. This is
done exclusively with the included key (S) – never attempt to remove the attach-
ments by hand, you might be seriously injured!
●
Make sure that the power plug is not plugged into the power socket.
●
Hold the handle of the key and push the fork of the key under the attachment
and against its shaft. You can hear a faint “Click”.
●
Lever the blade attachment up with the help of the key – the attachment dis-
engages from the foot of the blender shaft. Point the foot of the blender away
from you to prevent the attachment from being launched into your direction or
even your face.
●
Carefully hold the attachment in one hand and the key in the other hand. Turn
the key to the position “K” and lift the attachment off.
●
You can place the cleaned attachment and the key in the accessory box.
●
Be careful when touching the blades with your hand – they are extremely sharp.
“Click”
push
turn
pull
K
4. STARTING TO USE THE BLENDER
●
Only now plug the power plug of the completely unwound power cord into a
suitable power outlet. The LCD screen lights up, indicating that the speed setting
is 1 by displaying a 1.
●
Vertically insert the blender into the blender jug. Only the blender shaft must be
placed in the liquid or food you wish to blend, not the motor unit!
●
Avoid tilting the blender.
●
Use the + or − button to select a speed between 1 and 16. You can read the
current setting from the screen.
You can adjust the speed up or down with the + resp. − button, there are
16 speed settings to choose from. Each press of the button will increase resp.
reduce the speed by one step. If you press and hold the button, the steps are
quickly counted up or down. The current speed is displayed on the screen.
●
If the correct speed setting is displayed, push the ON/OFF button into the posi-
tion I and hold it there. The blender is only switched on while you keep the ON/
OFF button held down. As soon as you let go of it, the blender stops.
●
Start blending and shredding by making small movements up and down and
slightly turning the blender back and forth.
●
The operation time is counted up on the LCD screen in seconds and minutes.
●
If you want to change the speed while blending, release the ON/OFF button and
reset the speed with the + and − buttons. After that, push the ON/OFF button
back to the position I.
●
If you want to quit blending, let go of the ON/OFF button and wait for the
attachment to come to a complete standstill. Only then pull the blender out of
the mixture to prevent food splashing out of the blender jug.
●
Pull the power plug out of the power socket
Note: After 9 minutes and 59 seconds, the display switches back to 00 seconds
and the appliance switches off automatically. However, you should never use
the blender for more than 1 minute; if you wish to chop very hard foods,
do not use it for more than 10 seconds.
… 56 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Solis 8371 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Solis 8371 in the language / languages: English, German, Dutch, French, Italian as an attachment in your email.

The manual is 1,44 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info