708823

Solis 832 - Quick Blender Plus Manual

27
Zoom out
Zoom in
Previous page
1/42
Next page
27
• To reduce the risk of injury, never place cutter-assembly blades on base without jar properly attached.
• Always operate blender with cover in place.
• When blending hot liquids, remove center piece of two-piece cover.
• This unit is for household use only. Do not use for commercial or industrial purposes.
• Do not operate the appliance exceed 2 minutes. After that the appliance need to cool down for not
overheating.
• To disconnect, turn any control to OFF position, then remove plug from wall outlet.
• Always plug the appliance to a grounded electrical outlet.
• Use of extension cords may cause damage, injuries and/or accidents.
• Never pull power cord. Always disconnect from the power supply by pulling on the plug.
• Never touch the appliance with wet or damp hands.
• After having disconnected the power plug and after the appliance has cooled down, the appliance
must be cleaned only with a non-abrasive, slightly dampened cloth, adding a few drops of neutral,
non-aggressive detergent (never use solvents that damage the surface).
• In the event that you decide to dispose of the appliance, we advise you to make it inoperative by
cutting off the power cord. We also recommend that any parts that could be dangerous be rendered
harmless, especially for children, who may play with the appliance or its parts.
• Make sure the product is in good condition after you have removed the packing.
• Packaging must never be left within the reach of children since it is potentially dangerous.
Keep these instructions for future reference.
• We recommend the installation of a residual current circuit-breaker to provide additional protection
when using electrical appliances. It is advisable to use a circuit-breaker with a nominal fault current
of maximum 30 mA. Your local electrician can advise you.
Solis_QuickBlenderPlus-Betriebsanleitung.indd 27 04.02.14 08:21
… 27 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Solis 832 - Quick Blender Plus at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Solis 832 - Quick Blender Plus in the language / languages: English, German, Dutch, French, Italian as an attachment in your email.

The manual is 1,89 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info