708885

Solis 7220 - Twist Air Manual

43
Zoom out
Zoom in
Previous page
1/58
Next page
GB GB
84
ADJUSTING THE AUTOMATIC MODE
●
With the button, you can adjust the automatic mode. The LED light in the
motor unit lights up either in red, blue or orange, depending on the current
room air humidity. Depending on the humidity of the room, the unit automati-
cally adjusts the current ventilation speed resp. humidification output.
●
The LED light glows red: The room air humidity is between 0 and 45 %, so the
fan operates at high speed and the humidification level is high.
●
The LED light glows blue: The room air humidity is between 45 and 65 %, so
the fan operates at medium speed and the humidification level is medium.
●
The LED light glows orange: The room air humidity is above 65 %, so the fan
works at low speed, the humidification level is low.
●
If you touch the button again, the automatic mode is switched off and the
appliance operates in manual mode. The LED light in the motor unit is switched off.
ADJUSTING VENTILATION SPEED
●
Use the button to adjust the ventilation speed and thus the humidification
level. Each touch of the button switches the appliance to the next level, the
corresponding function light lights up. You can choose between four speed
settings:
●
Low (I) – Medium (II) – High (III) – Turbo (all three function lights illuminate)
●
If you touch the button again after the “Turbo” setting has been selected,
the appliance returns to the low setting (I).
●
As a general rule: The higher the ventilation speed, the more intensive the
humidification will be.
SETTING THE SLEEP MODE AND ADJUSTING THE LIGHT
COLOUR FOR THE NIGHT LIGHT
●
You can use the button to either select a LED color to be permanently used
or to activate the sleep mode.
●
One touch: If you touch the button once, the function light at LIGHT will flash
3 times and the currently lit LED colour will be selected for constant illumination.
●
Two touches: If you touch the button twice, the SLEEP function light flashes 10
times and the appliance switches to sleep mode: humidification and ventilation
are at the lowest level, all lights go out.
●
Three touches: If you touch the button a third time, the sleep mode is deacti-
vated and the appliance is working at the low humidification level. No LEDs are
lit on the motor unit. The function lights for ON/OFF and low (I) light up in blue.
●
Four touches: If you touch the button a fourth time, the LED light in the motor
unit lights up, switching between 7 colours, the appliance is working at the low
humidification level. The function lights for ON/OFF, LIGHT and low (I) light up
in blue.
85
●
Note: If you previously were in automatic mode or in manual mode without
light and now want to set the light colour, touch the
button once to return
to standard mode where all 7 LED lights will alternately light up. If you then
touch the
button one more time, the LED colour that is currently lit remains
constantly lit. Touch the
button again to enter sleep mode.
s
AFTER USE
●
If you want to switch the appliance off completely, always touch the ON/OFF
button
;
first, pull the power plug from the power socket and disconnect the
connection plug from the appliance.
●
If you do not want to use the appliance for more than 2 days, we recommend
pouring the water out of the water basin and drying the water basin with a dry
towel as well as leaving the appliance open to air dry the humidification mat.
●
In general, we recommend pouring the water remaining in the water
basin away before filling new water.
“LOW WATER LEVEL IN WATER BASIN” NOTIFICATION
●
If the water level in the water basin is too low, the function light next to ON/
OFF lights up in red. The fan remains in operation for a few hours to dry the
humidification mat. After that, the appliance stops automatically.
●
In normal mode resp. automatic mode, the fan remains in operation for another
7 hours to dry the humidification mat, the function light next to ON/OFF
switches from blue to red and flashes during the process. After the 7 hours
have elapsed, the fan stops automatically, but the function light next to ON/
OFF still flashes red.
●
In SLEEP mode, the fan remains in operation for another 10 hours to dry the
humidification mat, the function light next to ON/OFF lights up red. After the
10 hours have elapsed, the fan stops automatically, but the function light next
to ON/OFF remains red.
s
DAILY / WEEKLY CARE OF YOUR
AIR HUMIDIFIER
1. Change the water in the water basin every day. Only use fresh tap water without
any additives.
2. Clean the humidification mat and the water basin every week.
3. Should you not use the air humidifier for more than 2 days, we recommend
pouring the water out of the water basin and leaving the appliance open.
4. Should you not want to use your appliance for prolonged periods of time, please
clean and dry all parts carefully and store the air humidifier in the original pack-
aging in a dry room.
… 43 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Solis 7220 - Twist Air at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Solis 7220 - Twist Air in the language / languages: English, German, Dutch, French, Italian as an attachment in your email.

The manual is 1,44 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info