68
▲
STORAGE AND MAINTENANCE
ATTENTION: Always let the bed warmer cool down
completely before folding and storing it.
Do not place anything on the bed warmer and do
not crumple it for storage.
• The storage space should be dry, clean and not exposed to direct sunlight.
• Over time, your bed warmer might take on a slightly yellow tinge. This is abso-
lutely normal and has no influence on the functionality of your bed warmer.
▲
WASHING YOUR BED WARMER
• The easy to clean-material and removable control element with power plug al-
low for cleaning of the bed warmer by hand or on a delicate wash cycle. Use a
mild detergent and do not exceed 40°C (Choose a low spin cycle!). To remove
the control element, press the two protrusions on the left and right side of the
connection jack and pull away the connection plug.
Please note: Power plug, connection adaptor on the power cord and control
element must never come into contact with water!
• Let the bed warmer dry out completely on a large towel.
• Tip: Measure your bed warmer before washing it and occasionally stretch it while
it is still moist to assure that it returns to its original size.
• After washing, check the heating wires for damage by holding the bed warmer
against the light.
• Plug the connection adaptor back into the jack. The bed warmer must only be
operated with the included control element.
Connection jack Adaptor
press to disconnect
SOLIS Bettwärmer-oeko-engl.-GROSS_2013 09.07.13 15:59 Seite 68
