721460
17
Zoom out
Zoom in
Previous page
1/52
Next page
11/201611/2016
17
Installation instructions
External Dim Box WSI
The electrical connection may only be made by a trained electrician.
Unscrew the control module from the wall bracket. To do so, undo both screws
with the 3 mm Allen key (1).
Unscrew the four screws (2) at the connection module and fold out the connec-
tion module.
Feed the supply cable through cable gland (3) and connect to the terminals
labelledL↑,N↑andPE.
Feed the outgoing cables through cable glands (4) and connect to the termi-
nalslabelledL1↓,N↓andPE.
If only one outgoing cable is used, screw the supplied blanking plug into the
second cable outlet (4).
Tighten all cable glands with a 20 mm open ended spanner.
Re-close the external dim box with the four screws (2) while ensuring the seal
is correctly seated.
Fasten the wall bracket with suitable fastenings (not supplied - dependent on
the wall material) to the wall (observe the drilling template). Insert the control
module in the wall bracket and secure with the two M4x10 screws (1).
GB
PE
PE PE L1 N N L1
L1 N L
PE PE L1 N N L1
connected
PE
PE PE L1 N N L1
L1 N L
PE PE L1 N N L1
4
1
2
32
differentiation
inlet Drilling
40
44
Handbuch_2016_Dimmbox_S1_S3_RZ.indd 17 29.11.2016 11:14:45
17


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Solamagic S1-S3 WSI Dimmbox at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Solamagic S1-S3 WSI Dimmbox in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 1,48 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info