721461
32
Zoom out
Zoom in
Previous page
1/80
Next page
02/2015
Wireless remote control (continued)
Programming of the wireless remote control
Important:
Only those infrared heaters should be connected
to the mains that are to undergo programming to
a hand-held transmitter key. In this way several
receivers can be programmed (multipower).
Already programmed infrared heaters can remain
connected to the mains.
Use of other components with a radio-signal
interface (e.g. wireless PC mouse and keyboard)
can result in faulty operation of the radio receiver.
Switch off all other wireless components,
particularly when programming.
The radio receiver is briefly disabled after
command entry using the hand-held transmitter.
This is signalled by flashing (10 Hz) of LED 3.
Initial programming: The infrared heaters to be programmed are
connected to the mains. Enabling for automatic
programming is signalled by flashing (10 Hz) of
LED 1.
Now brief pressing of the desired KEY on the
hand-held transmitter triggers radio receiver
programming (LED 3 flashes). Repeated pressing
of the same key confirms the programming (LED 3
flashes again).
If desired, time-out switching can be programmed
by double-clicking: If the programmed key is
pressed briefly twice in succession, the heater will
switch off in 30 minutes. LED 2 flashes in a quick
rhythm (30 Hz). Double-clicking again increases
the heating duration to 60 minutes (normal flashing
at 10 Hz). Double-clicking again increases the time
before switching off to 90 minutes (slow flashing at
3 Hz). Double-clicking once more switches the time
control off. The programming cycle for time-out
switching begins again from the beginning.
Programming is ended by long pressing of the
programmed key of the hand-held transmitter. At
this point LEDs 1+2+3 signals the completion of
programming for two seconds.
GB
32


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Solamagic D1 - DS 02007 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Solamagic D1 - DS 02007 in the language / languages: English, German, Dutch, French, Italian, Spanish as an attachment in your email.

The manual is 1,4 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info