Manual Solac SW8220 - Cotton 12.0 (page 16 of 48) (English, French, Portuguese, Spanish)

718541

Zoom out

Zoom in

1/48

3. Pull out about 10 cm of thread from the bobbin and insert the bobbin

so it winds to the right.

4. Hold the end of the upper thread and rotate the hand wheel toward

you (counter clockwise) while gently pulling on the upper thread until the

bobbin thread emerges from the bobbin thread hole.

5. Pull the bobbin thread when it emerges from the bobbin thread hole.

It's easier to pull the thread out if you use a rod with a small tip.

6. Pass the upper and bobbin threads to the rear under the presser foot,

pulling them out together about 10 cm.

7. Attach the hook cover plate.

- Note: The upper and bobbin thread must be correctly installed. Sew

a test piece to make sure the machine is sewing correctly and then

begin sewing your project.

WINDING THREAD ONTO THE BOBBIN

- This is how you wind thread onto an empty bobbin (Make sure the

needle threadis not being threaded).

- CAUTION: Be sure to use metalbobbins.

1. Place a spool of sewing machine thread onto the thread spindle and

place the thread cap or place the thread spool on the desk (If the thread

spool is big).

2. As shown in the drawing, the thread passes through the bobbin hole,

and is winded 3-4 times to the right around the bobbin.



bobbin thread winding spindle and press down.

4. Slide the bobbin winding spindle to the right.

5. Move the power switch to "I" or "II" to start winding the bobbin.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Solac SW8220 - Cotton 12.0 in the language / languages: English, French, Portuguese, Spanish as an attachment in your email.

The manual is 4,65 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Solac SW8220 - Cotton 12.0 Manual

Product: