488724

Solac PV2210 Manual

14
Zoom out
Zoom in
Previous page
1/86
Next page
14
IRONING RECOMMENDATIONS
1 When the pilot light (11) goes out, indicating that the desired temperature has been
reached, rotate the steam selector (10) until the desired steam flow is obtained (fig. 5).
EMPTYING THE WATER TANK
) When you finish ironing, always empty the water from the tank.
1 Set the steam selector (10) to the closed position and the temperature selector (9)
to the 0 position.
2 Unplug the plug from the mains
3 Open the water filler opening (5) and place the iron face down over the sink, gently
shaking it to completely empty the tank.
4 Wait until the iron is completely cold and store it in the vertical position in a safe place.
IRONING RECOMMENDATIONS
STEAM IRONING
, For professional ironing results, we recommend you steam iron garments first and then
dry iron them.
SUPERSTEAM
) If you want more steam while ironing, press the button (8) two or three times, aim the
supersteam at the desired area of the garment and pass the iron soleplate over it to dry
it. Thus is useful for eliminating wrinkles.
) The supersteam may not be released on the first occasions.
This is normal. Press the push-button a couple of times. Once the supersteam circuit
has been primed, the jet of steam will be released.
• We recommend pressing the control at 5-second intervals.
VERTICAL STEAM
) This allows you to remove creases from delicate garments without having to put them
on the ironing board: jackets, overcoats, curtains, etc.
1 Fill the water tank as explained in the “BEFORE STARTING TO IRON” section.
2 Place the garment on a hanger, well away from other garments, people, animals, etc.
n Do not discharge steam onto a garment hanging in the wardrobe or on a person.
3 Set the steam control (10) to the closed position and the temperature selector (9)
to the Max position.
4 Bring the iron close to the garment, in the vertical position, (between 15 and 30 cm) and
press the supersteam button (8) once only. Do not position the iron too close to the
garment, because you could damage it.
5 Wait a few seconds before pressing the button (8) again, so as not to damage the
garment. Most wrinkles can be eliminated with three sprays of steam.
DRY IRONING
1 If there is water in the tank, turn the steam selector (10) to the closed position (fig. 2).
2 Plug in the iron and set the temperature selector (9) to the desired position.
, The pilot light (11) will go off when the temperature is reached.
IRONING WITH SPRAY
) Spray can be obtained by pressing the corresponding button (7) when dry ironing or
ironing with steam. The iron is at any temperature level.
• Press the spray button (7) as many times as you want to use this function.
… 14 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Solac PV2210 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Solac PV2210 in the language / languages: English, German, Dutch, French, Italian, Polish, Portuguese, Spanish as an attachment in your email.

The manual is 0,87 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info