488722

Solac PV1810 Manual

15
Zoom out
Zoom in
Previous page
1/86
Next page
OTHER FUNCTIONS 15
en
OTHER FUNCTIONS
ANTI-LIMESCALE SYSTEM (only Mod. PV 2010 and PV2210)
This iron has an innovative built-in anti-limescale system, consisting of a resin filter that
retains the limescale substances from the water, so these cannot reach the steam chamber
of the soleplate, thus extending the life of the iron.
The existence of this anti-limescale system does not mean that the recommendations about
water hardness mentioned in the “BEFORE STARTING TO IRON” section can be ignored.
ANTI-DRIP SYSTEM (only Mod. PV2210)
The iron incorporates an anti-drip system that prevents the iron from dripping, even when it
is switched off.
STORAGE AND CLEANING
) Clean the appliance after using it for the first time, immediately after each use and after
a long time without use.
SOLEPLATE
1 Disconnect the iron and allow the soleplate to cool down.
, Use clay-based, environmentally friendly products to clean the soleplate.
EXTERNAL PART
1 To clean the external part of your iron, use a cloth dampened with soapy water.
, Do not use solvents or abrasive products to clean your iron, as these could damage
some of the plastic parts and/or remove some of the marks
2 Store your iron in a vertical position, coiling the cord around the base and pressing the
cable into the fixing clip.
) Although the power cord is fitted with a 360º swivel piece, NEVER FORCE this
cord when coiling it around the appliance on the first turn.
SELF-CLEANING
) It is advisable to carry out the self-cleaning operation about once a month, depending
on the frequency of use and the hardness of the water used.
1 Ensure that the tank is half filled with water.
2 Place the iron in the vertical position.
3 Plug in the iron and turn the temperature selector (9) to the Max position.
4 Wait for the pilot light to go off (11) indicating that the desired temperature has been reached.
5 Turn the temperature selector (9) to the 0 position and unplug the iron from the mains.
6 Place the iron in the horizontal position over the sink or a suitable receptacle.
7 Set the steam selector (10) to the self-cleaning position to open the water circuit.
To do so, press the steam selector down and turn (fig. 6).
8 Swing the iron gently from side to side. Steam and water will come out of the holes in
the iron, flushing out dirt and impurities (fig. 7).
n Be careful when performing this operation, as the water and steam are very hot and
can cause burns.
9 Place the iron in the vertical position and wait for it to cool completely.
10 Wipe the soleplate with a damp cloth.
) Remember that damage caused by the effects of limescale is not covered in the
warranty.
… 15 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Solac PV1810 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Solac PV1810 in the language / languages: English, German, Dutch, French, Italian, Polish, Portuguese, Spanish as an attachment in your email.

The manual is 0,87 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info