799527
6
Zoom out
Zoom in
Previous page
1/36
Next page
ENGLISH EN
DESCRIPTION
A Body
B Handle
C Lid
D Network connection plug
E Cable connector
F Connector input
G Base
H On/off switch
If the model of your appliance does not have
the accessories described above, they can
also be bought separately from the Technical
Assistance Service.
USE AND CARE:
Do not use the appliance when empty.
Do not use the appliance if the on/off switch
does not work.
Do not move the appliance while in use.
Use the appliance handle/s, to catch it or move
it.
Do not use the appliance if it is tipped up and
do not turn it over.
Do not turn the appliance over while it is in use
or connected to the mains.
To keep the non-stick treatment in good condi-
tion, do not use metal or pointed utensils on it.
Respect the MAX and MIN levels.
Disconnect the appliance from the mains when
not in use and before undertaking any cleaning
task.
Store this appliance out of reach of children
and/or persons with physical, sensory or re-
duced mental or lack of experience and knowl-
edge.
Do not store the appliance if it is still hot.
Never leave the appliance connected and un-
attended if is not in use. This saves energy and
prolongs the life of the appliance.
CAUTION: Water condensation may appear
on the surfaces and objects around this appli-
ance.
INSTRUCTIONS FOR USE
BEFORE USE:
Make sure that all products’ packaging has
been removed.
This appliance has only been designed for
warming milk and liquids, and for preparing hot
chocolate. Do not use it for any other purpose.

advisable to boil water within, so as to remove
all remaining dust and impurities.

the parts that will come into contact with food in
the manner described in the cleaning section.
Some parts of the appliance have been lightly
-
ance is used a light smoke may be detected.
After a short time, this smoke will disappear.
Prepare the appliance according to the func-
tion you wish to use:
USE:
Extend the cable completely before plugging
it in.
Ensure that the electronic connector is proper-
ly attached to the appliance.
Insert the cord connector into the connector on
the base of the milk warmer.
Connect the appliance to the mains.
Raise the lid and pour the milk into the milk
warmer. The quantity of milk must be between
the MIN and MAX marks.
Turn the appliance on, by using the on/off
switch.The pilot light will come on.
HEATING MILK
Wait a few minutes until the milk has reached
the required temperature.
We recommend keeping the lid closed while
the appliance is operating, to prevent skin from
forming.
Once the maximum temperature (80ºC) has
been reached, this temperature will remain
constant but without boiling.
PREPARING HOT CHOCOLATE
Break the chocolate up into pieces for better
dissolution.
Add the pieces of chocolate to the milk.
Stir gently from time to time using a wooden
spoon until an even mixture has formed. Do
not use abrasive products that could damage
the coating.
Add more chocolate or milk to the mixture to
obtain thicker or thinner chocolate, depending
on your preference.

APPLIANCE:
Turn the appliance off, using the on/off switch.
Unplug the appliance from the mains.
6


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Solac MH9100 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Solac MH9100 in the language / languages: English, German, Dutch, French, Italian, Polish, Portuguese, Spanish as an attachment in your email.

The manual is 0.79 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info