Manual Solac ME7713 (page 12 of 77) (English, German, Dutch, French, Italian, Polish, Portuguese, Spanish)

719068

Zoom out

Zoom in

1/77

 BODY-MODELLING (11): “Smooth roller”

head, effective treatment on painful cellulite

 DRY BRUSH (9): Exfoliating brush, removes

dead skin and stimulates blood flow.

 BALL MASSAGE HEAD (12): Stimulates and

tones the muscles, helping to firm the skin. It

improves circulation in the abdominal area,

eliminating localised toxins and improving the

intestinal tract, preventing constipation.

INSTRUCTIONS FOR USE

GENERAL RECOMMENDATIONS FOR USE:

 The intensity control allows you to regulate the

intensity of the massage as required. Start with

a gentle speed and progressively increase

depending on your sensitivity to the massage.

 The red light is an additional massage function.

Use it to strengthen the effectiveness of the

massage.

 If you use specific treatment creams (toning or

anti-cellulite) apply these after the massage.

 The appliance is equipped with a motor

protection system that switches the motor off if

it overheats. If this occurs, leave the appliance

to cool down before attempting to restart it.

 If you wish to continue using the appliance,

allow it to cool down before proceeding.

 For a more effective treatment, use the

appliance regularly. Use the appliance each

day until you notice the results, you can then

use it to maintain these results. To maintain the

results over the long-term, adapt your lifestyle

habits and food.

BEFORE USE:

 Make sure that all the product’s packaging has

been removed.

USE:

 Unroll the cable completely before plugging it

in.

 Connect the appliance to the mains.

 Turn the appliance on using the on/off switch.

 Select the desired speed.

 Choose a massage head

 You may alternate the use of different heads

during the same massage.

 Set the intensity of the massage using the

intensity control (3) and place the massager on

the area on which you are going to work.

 Use the massage controller to set the intensity,

using your finger to turn the controller (3) one

way or the other depending on the desired

setting (Fig. 4)

 Move the switch (2) to the massage position

(Fig.2 B) or to the “massage + infrared position

(IR) position” (Fig.2 C) according to the desired

treatment.

 Fit the head corresponding to the desired

treatment onto the head adaptor (Fig. 3)

 Hold the appliance firmly with both hands and

move it over the skin in the direction of the

blood circulation (see “Massage Direction”).

 Without pressing too hard, simply glide the

massager over the area to be treated. Pressing

the appliance too hard against the skin will

prevent the motor from operating efficiently.

MASSAGE DIRECTION:

 Always glide the appliance over the skin in the

direction of the blood circulation. In an upward

direction.

 NEVER directly massage the spine.

 NEVER directly massage a bone (knee, ankle,

elbow). The protruding parts of the massage

head could hit the bone, causing an injury.

 Legs: Place the appliance on the thigh, close to

the knee, and glide it gently upwards towards

the hip (Fig. 5)

 Buttocks: Combine upward and circular

movements. (Fig. 6)

 Abdomen: Place the appliance on the navel

and move it gently outwards (Fig 7). Never

make circular movements around the navel.

 Arms: Place the appliance close to the elbow

and glide it gently towards the armpit. Repeat

the massage from the armpit towards the elbow

(Fig. 8)

 Back: Place the appliance in the area of the

spine and glide it gently upwards towards the

shoulder blade (fig. 9)

CHOOSING A MASSAGE HEAD:

1 SKIN PREPARATION

 It is essential to start by preparing the skin

properly before performing the massage in the

area where it is required, so we should

exfoliate the skin using the natural bristle brush

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Solac ME7713 in the language / languages: English, German, Dutch, French, Italian, Polish, Portuguese, Spanish as an attachment in your email.

The manual is 3,72 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Solac ME7713 Manual

Product: