Manual Solac MD7420 (page 12 of 52) (English, German, Dutch, French, Italian, Polish, Portuguese, Spanish)

719054

Zoom out

Zoom in

1/52

task.

- This appliance is for household use only, not

professional, industrial use.

- Store this appliance out of reach of children

and/or persons with physical, sensory or redu-

ced mental or lack of experience and knowled-

ge.

- Do not store the appliance if it is still hot.

- Do not store or transport the appliance if it is

still hot.

- Never rest the appliance into a surface while in

use.

- Do not use the appliance with pets or animals.

- Never leave the appliance connected and unat-

tended if is not in use. This saves energy and

prolongs the life of the appliance.

- SERVICE:

- Make sure that the appliance is serviced only

by specialist personnel, and that only original

spare parts or accessories are used to replace

existing parts/accessories.

- CAUTION: There is a risk of re if the

appliance’s cleaning is not done according to

these instructions.

- Any misuse or failure to follow the instruc-

tions for use renders the guarantee and the

manufacturer’s liability null and void.

DESCRIPTION

A On/off switch

B Accessory locking and unlocking button

C Comb accessory

D 32mm curling tong accessory

E 19mm curling tong accessory

F Spiral sleeve

G Brush sleeve

H Plate support

H.1 H.2. Crimper/Straightener plates

I Hanging loopp

J Storage bag

If the model of your appliance does not have the

accessories described above, they can also be

bought separately from the Technical Assistance

Service.

INSTRUCTIONS FOR USE

BEFORE USE:

- Make sure that all products’ packaging has

been removed.

- Prepare the device according to the function

you wish to perform.

ASSEMBLY THE ACCESSORIES

- Install all accessories with the appliance cold to

avoid burns.

PLACING AND REMOVING ACCESSORIES D,

E AND H

- 1. Press the lock and unlock button (B), insert

the desired accessory in the direction indicated

by the arrows. (Fig. 1)

- 2.To remove the accessory follow the reverse

procedure.

PLACING AND REMOVING COMB C

- 1.By pressing the button C, introduce the acces-

sory in the opposite side of the power button A.

(Fig. 2)

- 2.To remove the accessory follow the reverse

procedure.

PLACING AND REMOVING BRUSHES F AND G

- 1. Slide the brush through the curling tong E.

- 2.To remove the brushes, press the curlong

tong and turn the brush 90 degrees and slide it

out. (Fig. 3).

PLACING AND REMOVING PLATES H.1, H.2,

- 1. Slide the plate down, till to hear the click.

- 2.To remove the accessory press the accessory

side buttom and slide up. (Fig. 4)

USE:

- Attach the desired accessory.

- Unroll the cable completely before plugging on

in.

- Plug the appliance into the mains.

- Start the device by pressing the on / off switch.

CURLING TONGS D AND E

- 1.Prepare a small section of hair.

- 2. Press the lever to open the tong, then slip the

tips of the hair between the roller and the tong.

- 3. Release the clamp to close it.

- 4.With the other hand hold the insulated plastic.

- 5. Rotate the appliance to curl up to the scalp,

take care not to burn yourself.

- 6. After 5 seconds, unroll carefully.

- 7. Repeat the process with the rest of the hair.

(Fig. 5)

BRUSHES F AND G

- 1.Prepare a small section of hair and wrap it

around the brush.

- 2.Keep for 5 to 10 seconds and unroll. (Fig. 6)

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Solac MD7420 in the language / languages: English, German, Dutch, French, Italian, Polish, Portuguese, Spanish as an attachment in your email.

The manual is 1,19 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Solac MD7420 Manual

Product: