Manual Solac LUCID i10 (page 20 of 60) (English, French, Portuguese, Spanish)

718596

Zoom out

Zoom in

1/60

BATTERY CHARGE:

- Warning: A new battery does not come with a

full charge and must be fully charged before

using the device for the rst time.

- Charge the battery at room temperature bet-

ween 4 and 40ºC.

- Turn on the ON / OFF button located on the

bottom of the robot.

- Put the robot in the charging base and ensure

that the automatic charging poles are aligned

correctly.

- Operation button (D): the red LED will light

blinking. When the LED stops blinking the robot

is loaded. Load the robot for 4 hours before the

rst use.

ACTIVATE THE ROBOT

- Before starting use, ensure that the power

switch (R) is on.

- Press the operation button (D) to awaken the

robot.

- Press the operation button (D) to start cleaning

in AUTO (AI) mode, you can also start cleaning

by pressing the AUTO button on the remote

control.

- NOTE: If the battery is about to run out, the

robot will return to the charging base automati-

cally to recharge.

- NOTE: If the load base is inaccessible, the

robot can not be recharged, it will return to the

initial situation and the cleaning system will

end. In this case, place the robot manually in

the charging base so that it can be recharged

correctly.

PAUSE THE ROBOT

- To stop the robot press the operation button (D)

or press the on / off button (AL) on the remote

control.

- To resume the cleaning cycle, press the opera-

tion button (D) again.

- For the robot to return to the charging base (U)

press the Go Home button (AJ).

POWER OFF THE ROBOT

- To turn off the robot press the operation button

(D) next until the operation indicator goes off.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Solac LUCID i10 in the language / languages: English, French, Portuguese, Spanish as an attachment in your email.

The manual is 4,19 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Solac LUCID i10 Manual

Product: