Manual Solac fg 6940 ideal 4000 (page 10 of 55) (English, German, Dutch, French, Italian, Polish, Portuguese, Spanish)

363931

Zoom out

Zoom in

1/55

OPERATION

• Before you use the fryer for the first time we recommend you to wash the

basket (10) and the vat (8). To do so, take the basket (10) out of the vat, lift

out the control panel (3) and take out the vat (8). You can wash the basket

and the vat either using soapy water or by putting them into the dish-

washer. Never wet the control panel (3). For operation, put all the elements

back in their place in reverse order, making sure that the panel guides match

the body guides.

• Place the appliance on a horizontal, flat, stable surface away from the

edges and do not allow the cord to hang over the edge of the table or work

surface or to come into contact with a hot surface.

• Pour the oil or liquid fat into the deep fryer and remember that the oil

level must be above the minimum and below the maximum. These levels

are indicated inside the vat.

• Place the basket handle (11) in the vertical position and squeeze the metal

rods into the basket support holes (fig. A). Next place the handle in the

horizontal position until it fits into the basket support.

• Plug in the fryer and press the I/O switch (5) to the “I” position. At this mo-

ment the orange pilot light (6) will come on. Turn the temperature control

regulator and select the desired temperature, depending on the food to be

fried. When the oil reaches the selected temperature, the green pilot light

(7) will come on, and the orange pilot light (6) will remain lit.

• Place the food in the basket (10) while the basket is out of the fryer.

• Gently put the basket into the fryer and place it in its frying position (fig.

b). When the food is placed inside the fryer the green pilot light (7) will

switch off, since the food causes the oil to cool due to the temperature dif-

ference, and it will come on again when the oil reaches the temperature

indicated on the temperature regulating control.

• The food should always be covered by the oil.

• Close the lid (1) over the fryer.

• After frying the food, open the deep fryer lid, lift out the basket and shake

it gently. Next, hook it into the draining position (fig. C) for the food to drain

off as much oil as possible.

• Once the food is drained, take the basket out of the deep fryer and empty

it.

• Place the temperature control at the minimum position and press the I/O

switch (5) to the “O” position. Then unplug the appliance.

• When the oil is cold, place the basket inside the fryer and turn the handle

towards the inside. If you were using solid fat, leave it to solidify in the vat

and store the deep fryer with the fat in it.

USE WITH SOLID FAT

If you use solid fat for frying (when not previously used), you must take the

following precautions:

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Solac fg 6940 ideal 4000 in the language / languages: English, German, Dutch, French, Italian, Polish, Portuguese, Spanish as an attachment in your email.

The manual is 0,45 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Solac fg 6940 ideal 4000 Manual

Product: