488718

Solac CVG9900 Manual

13
Zoom out
Zoom in
Previous page
1/90
Next page
OPERATION 13
en
1 Extend the cable fully and plug in the appliance.
Stand the CVG upright.
) A buzzer will sound and all the icons on the screen will be displayed, indicating that the
appliance is working correctly. The icons and (fig. 1A) will then start to
flicker.
When the CVG reaches the selected temperature, the icons will light up continuously.
(fig. 1B).
2 Select the desired working temperature according to the garment to be ironed (see
“TEMPERATURE SELECTION (fig. 2)”).
3 Select ironing with steam function (medium or maximum) or ironing without steam
function, as required (see STEAM SELECTION (fig. 3)”).
4 If you wish, you can lock the touchscreen to prevent the accidental activation or
deactivation of any function. To do so:
Without touching the handle, press the temperature selector for more than 3 seconds
(5). (fig. 4).
) The icon will light up.
5 To unlock the touchscreen, press the temperature selector (5) once again, without
touching the CVG's handle. The icon will disappear.
6 Take the CVG by the handle and move the hotplate over the garment to be ironed.
TEMPERATURE SELECTION (fig. 2)
The CVG has 4 temperature positions for you to choose between, by pressing the
temperature selector (5).
1 Press the temperature selector (5) as many times as necessary until the desired
temperature level is displayed.
Position
( ) (default position)
Position (••)
(fig. 2A)
Position (•••)
(fig. 2B)
Position (MAX)
(fig. 2C)
, The corresponding icon will flicker until the temperature selected has been reached.
Once this temperature has been reached, the icon will light up continuously.
STEAM SELECTION (fig. 3)
The CVG has two steam positions; medium steam (35 gr/min) and maximum steam (60 gr/
min). To select the desired steam level:
1 Press the steam selector (6) as many times as necessary until the desired steam flow
icon is displayed (medium (fig. 3A) or maximum (fig. 3B)). Steam will start to
be emitted.
, If the steam selector is selected without having reached the desired temperature, the
steam selector icon and temperature icon selected will flicker until the working
temperature is reached (fig. 3C). Once this temperature has been reached, they will no
longer flicker simultaneously and steam will start to be emitted.
2 To stop the emission of steam, press the steam selector again (6) until the icon is
displayed, and steam will stop being emitted automatically.
PRESENCE SENSOR
The CVG has a presence sensor which stops the emission of steam immediately after
detecting lack of contact on the handle. This ensures lower power consumption as well as
greater autonomy of the tank (lower water consumption).
The steam function switches back on automatically when taking hold of the CVG handle.
BOOKCVG9900.book Page 13 Friday, April 16, 2010 1:59 PM
… 13 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Solac CVG9900 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Solac CVG9900 in the language / languages: English, German, Dutch, French, Italian, Polish, Portuguese, Spanish as an attachment in your email.

The manual is 2,29 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info