718544

Solac CVG9613 Manual

10
Zoom out
Zoom in
Previous page
1/60
Next page
EN
you would hear a strange noise from the mi-
cro-pump. Switch off the steam selector to pre-
vent any damage to the system.
• Switch off the appliance and ll the water tank.
When switching it on again, this noise will dis-
appear.
USE:
• Unroll the cable completely before plugging it
in.
• Connect the appliance to the mains.
• Temperature and steam status are shown
on the screen (G), when both values remain
steady this indicates that the CVG is ready for
use, it will also beep when it reaches its setting.
• To select the various programs just turn the
digital screen to the left or right depending on
whether we wish to increase or decrease the
program number, the program will change with
a slight turn. Left decreases, right increases.
(Fig. 2) once turned, the dial will return to po-
sition.
• Given that the soleplate takes a long time to
cool, we recommend starting off with delicate
garments and then increasing the program
setting.
PROGRAM GARMENTS
0
Off
1 Antisheen
, special setting to avoid creating
sheen on dark garments
2 ECO
setting, the most efcient, optimised for
cost-effective ironing.
3 Delicates;
ironing directly on T-shirts with printed
decals and any delicate garment.
4 AUTO;
single setting suitable for all type of
ironing, except for very delicate garments.
5
Ironing
shirts
and cotton garments
6 Denim jeans
and heavy cotton
7
Linen;
fabrics that are difcult to iron.
8 TURBO;
Maximum temperature and steam ow
for
ULTRA FAST
ironing.
• -IMPORTANT: If the fabric is made up of var-
ious kinds of bres, select the temperature for
the bre that requires the lowest temperature.
(For example, select the temperature for pol-
yester for a fabric made out of 60% polyester
and 40% cotton (pos. 3)).
• - Temperature and steam status are shown on
the
PRESENCE SENSOR (D)
• The CVG is equipped with a presence sensor
(D) that instantly shuts off the steam outlet if
the handle is not being held. This leads to en-
ergy savings and increased autonomy of the
water tank (lower water consumption).
• Steam ow is automatically re-established by
holding the handle on the CVG
• Removing your hand from the handle does not
switch off the selected steam function, it only
interrupts the steam ow temporarily until it de-
tects that the handle is being gripped again.
The screen continues to display the icon for
the selected steam function.
DRY AND/OR STEAM IRONING
• The appliance has a steam control button
(C) which, when set to off, allows dry ironing
(without steam) or with steam if it is switched
on, a light indicates its status, on/enabled off/
disabled.
EXTRA STEAM:
• It is possible to iron with maximum steam ow
regardless of the setting. To do this, in the case
of steam ironing, just press the steam button
(c), the steam ow will increase to maximum,
to stop steam production just press the steam
button again. The screen displays the current
setting, with a steam bar which shows empty
when switched off, up through the various set-
tings for each program to maximum when the
super steam setting is activated.
STEAM BLAST:
• This function provides extra steam for remov-
ing creases.
• Press the steam blast button (B) only in pro-
grams 7 and 8, the screen will display an icon
to indicate when the EXTRA function (Fig
2) is ready. With the lower programs, sole-
plate temperature is not sufcient to produce
a steam blast, consequently the super steam
icon will not be displayed. Wait a few seconds
until the steam penetrates the bres of the
garment before pushing the button again. For
optimum steam quality, do not apply more than
three successive blasts.
• During initial use it is necessary to press re-
peatedly in order to prime the super steam
water circuit.
VERTICAL IRONING:
• It is possible to iron hanging curtains, items of
clothing on their own hanger, etc. To do so, fol-
low these instructions:
• Iron from top to bottom while pressing the
steam control (B), follow the instructions given
… 10 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Solac CVG9613 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Solac CVG9613 in the language / languages: English, German, Dutch, French, Italian, Polish, Portuguese, Spanish as an attachment in your email.

The manual is 2,21 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info