Manual Solac CVG9512 (page 10 of 60) (English, German, Dutch, French, Italian, Polish, Portuguese, Spanish)

718535

Zoom out

Zoom in

1/60

pump will automatically switch off after 25” to

30” to protect the micro-pump

• If the appliance were to run out of water com-

pletely with the steam selector activated,

you would hear a strange noise from the mi-

cro-pump. Switch off the steam selector to pre-

vent any damage to the system.

• Switch off the appliance and ll the water tank.

When switching it on again, this noise will di-

sappear.

USE:

• Unroll the cable completely before plugging it

in.

• Connect the appliance to the mains.

- Once plugged in the appliance begins to heat

up to its default ECO setting. Automatic tempe-

rature for all fabrics and optimised steam ow for

efcient, safe ironing.

• Do not use temperatures higher than those in-

dicated on the garments to be treated.

• ECO Temperature for synthetic bres (Polyes-

ter, Nylon…). Setting ●

• ECO Temperature for silk, wool.

• Setting ●●

• TURBO Temperature for cotton. (Minimum

temperature for ironing with steam)

• Setting ●●●

• TURBO Temperature for linen. Max setting.

• If garment has various kinds of bres, select

the temperature for the bre that requires the

lowest temperature. (For example, select the

temperature for polyester for an article made

out of 60% polyester and 40% cotton).

• Wait until the indicator (G) is lit steady green,

this means that the appliance has reached

temperature, while it is heating or cooling the

indicator will ash red.

• - While using the appliance the indicator light

(G) remains a steady green

PRESENCE SENSOR (D)

• The CVG is equipped with a presence sensor

(D) that instantly shuts off the steam outlet if

the handle is not being held. This leads to

energy savings and increased autonomy of the

water tank (lower water consumption).

• Steam ow is automatically re-established by

holding the handle on the CVG

• Removing your hand from the handle does not

switch off the selected steam function, it only

interrupts the steam ow temporarily until it de-

tects that the handle is being gripped again.

The screen continues to display the icon for

the selected steam function.

DRY IRONING:

• The appliance has a steam control button

(without steam) or with steam if it is switched

on, a light indicates its status, on/enabled off/

disabled.

STEAM IRONING:

• It is possible to iron with steam as long as the

tank has water and at any setting.

STEAM BLAST:

• This function proportions extra steam for elimi-

nating wrinkles.

• Press the steam blast button (B), always in the

TURBO position, and wait a few seconds for

the steam to penetrate the bres of the gar-

ment before pressing the button again. For op-

timum steam quality, do not apply more than

two successive blasts at a time. If the steam

indicator ashes DO NOT USE THE SUPERS-

TEAM FUNCTION

• The steam blast button has to be pressed re-

peatedly to release the rst shot.

VERTICAL STEAMING:

• It is possible to iron hanging curtains, items of

clothing on hangers, etc. To do so, follow the

instructions:

• Iron from top to bottom while pressing the

steam control (B), follow the instructions given

in the Steam Blast section.

• Important: for cotton and linen, it is recommen-

ded to have the soleplate in contact with the

material. For other more delicate fabrics, it is

recommended to keep the soleplate a few cen-

timetres away from the fabric.

STAND-BY FUNCTION:

• In order to save energy, the appliance passes

to stand-by after 3 minutes if the user does not

use it.

• To resume ironing just touch any button or the

handle of the iron.

ONCE YOU HAVE FINISHED USING THE

APPLIANCE:

• Unplug the appliance from the mains.

• Drain the water out of the appliance.

• Clean the appliance.

CLEANING

• Disconnect the appliance from the mains and

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Solac CVG9512 in the language / languages: English, German, Dutch, French, Italian, Polish, Portuguese, Spanish as an attachment in your email.

The manual is 1,98 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Solac CVG9512 Manual

Product: