Manual Solac CT8680 (page 11 of 64) (English, German, Dutch, French, Italian, Polish, Portuguese, Spanish)

718625

Zoom out

Zoom in

1/64

a. ON/OFF switch

b. Temperature control switch

c. Automatic safety shut-off pilot light

d. Temperature display screen

INSTRUCTIONS FOR USE



• Make sure that all products’ packaging has

been removed.

• This appliance has been designed exclusively

        

use it for any other purpose.



• Spread the pad out fully, making sure it’s not

folded or creased.

• Unroll the cable completely before plugging it

in.

• Ensure that the electronic connector is proper-

ly attached to the appliance.( Fig. 1).

• Connect the appliance to the mains.

• The display screen (d) and the automatic shut-

off pilot light (c) will light up for a moment (Fig.

2).

• Turn the appliance on, by using the on/off switc

(a).

• The display

screen will light up (d) and show

temperature position 1.

• (CT8635, CT8639, CT8680)

fer to section

Troubleshooting (Fig. 3).

• Press the temperature control button (b). It will

start at level 1. Continue to press the button to

increase the temperature up to the maximum

level 4 (CT8635 – CT8639) or 6 (CT8680 –

CT8690) (Fig. 4).

• As a security measure, the appliance is pro-

grammed to turn off automatically after 120

min (CT8635- CT8639) and 90 min. (CT8680

– CT8690) of continuous use. If the appliance

is stopped in this way, press the power switch

again to reheat.

• Select the desired temperature

-



• Turn the appliance off, using the on/off switch

(a).

• Unplug the appliance from the mains.

• Clean the appliance.



• If the letter F appears on the display screen,

proceed as follows:

• Check that the power cable connector (4) is

correctly inserted into the pad connector (5).

If not, press the ON/OFF button (a) and insert

it correctly.

• Check that the operating failure is not caused

by overheating. To do so, press the ON/OFF

button (ai) and allow the pad to cool. Find out

what is causing the pad to overheat and elimi-

nate the cause.

• If the appliance stops working, contact an au-

thorised technical service.

CLEANING

• Disconnect the appliance from the mains and

allow it to cool before undertaking any cleaning

task.

• Clean the equipment with a damp cloth with a

few drops of washing-up liquid and then dry.

• Do not use solvents, or products with an acid

or base pH such as bleach, or abrasive prod-

ucts, for cleaning the appliance.

• The pad may be washed by hand in warm

water (CT8680) and by machine (CT8635,

CT8639, CT8690) at a temperature of up to

30ºC. Remove the control before washing (Fig.

1). The control must never be submerged in

water.

• Dry the product immediately after any clean-

ing task making sure that the appliance inlet is

perfectly dry.

• The pads (CT8635, CT8639) have a remova-

ble cover that can be washed by hand or ma-

chine at a temperature that does not exceed

30 ºC.

• Do not use the pad if the removable cover is

not completely dry.

• Never submerge the connector in water or any

other liquid or place it under running water.

• It is advisable to wash the cushion and cov-

er only if they are dirty or dusty. If washed too

often the product could wear out vey quickly.



• Let the appliance cool down before putting it

away.

• When the appliance is not in use, keep in a dry

place and avoid placing heavy objects on top

as they could damage the cables.

• Avoid creases forming. Check the appliance

and power cord frequently to make sure they

are in perfect condition.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Solac CT8680 in the language / languages: English, German, Dutch, French, Italian, Polish, Portuguese, Spanish as an attachment in your email.

The manual is 2,15 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Solac CT8680 Manual

Product: