Manual Solac CT8640 (page 11 of 62) (English, German, Dutch, French, Italian, Polish, Portuguese, Spanish)

610557

Zoom out

Zoom in

1/62

SELECTING THE TEMPERATURE

• To change the temperature selection, press the temperature button (3.6);

you can increase the temperature position by pressing the selection increase

button (3.8). If a position higher than 1 is selected, you can reduce the

temperature position by pressing the selection reduction button (3.9).

• To confirm your selection, press the temperature button again (3.6) or else it

confirms automatically after a few seconds. The temperature that corresponds

to the selected temperature position appears on the screen when you confirm

the selection (3.2).

• There are 4 temperature positions that correspond to the following tem-

peratures:

– Position 1: 30ºC

– Position 2: 35ºC

– Position 3: 40ºC

– Position 4: 45ºC

• However, these temperatures are approximate and may vary slightly while

the appliance is in use.

SELECTING THE OPERATING TIME

• When the appliance is switched on, the time selected by default before the

product switches off automatically is 6 hours. You can reduce this time by

pressing the timer button (3.7) and then the selection reduction button (3.9).

You can also increase the time before the appliance switches off automati-

cally by pressing the timer button (3.7) and then the selection increase

button (3.8).

• These buttons (3.8 and 3.9) increase or decrease the time by one hour in a

range of 1 to 10 hours.

• Your selection will be confirmed after a few seconds without modifying the

selection or by pressing the timer button again (3.7).

• When you confirm the selection, the selected time appears on the screen

(3.5) and the time starts to count down one hour at a time; this also appears

on the screen (3.4).

• Once the selected time has passed, the appliance stops heating up, the

screen shows the FF symbol and the light on the control flashes until any

button is pressed.

• If any operating error is detected or the power cord is not properly con-

nected to the product, the screen shows the ER symbol and the light

flashes. Make sure the cord is properly connected, switch off the control and

switch it back on.

• The light of the screen is blue; it comes on while the control is being used

and switches off automatically after 5 seconds. If you want it to light up

again, press the selection increase button 3.8 or the selection reduction

button 3.9.

Calientacamas CT8640-8645 11 4/1/07, 13:45:21

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Solac CT8640 in the language / languages: English, German, Dutch, French, Italian, Polish, Portuguese, Spanish as an attachment in your email.

The manual is 1,15 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Solac CT8640 Manual

Product: