718621

Solac CT8624 Manual

11
Zoom out
Zoom in
Previous page
1/68
Next page
EN
spare parts or accessories are used to replace
existing parts/accessories.
• Any misuse or failure to follow the instructions
for use renders the guarantee and the manu-
facturer’s liability null and void.
DESCRIPTION
1. Blanket
2. Power cord
3. Power cord connector
4. Product connector
5. Control
a. Temperature control sliding switch
b. Temperature display screen
INSTRUCTIONS FOR USE
BEFORE USE:
• Make sure that all products’ packaging has
been removed.
USE:
CONNECTING THE CONTROLLER
• WARNING: Make sure that the controller is in
the 0 (or off) position.
• WARNING: Before each use, check that your
     -
cured before switching on. In order to do so,
spread out the underblanket, use the bands to

mattress (Fig. 1). Then put on your bedsheet in
the usual manner.
• Failure to observe these instructions will cause
overheating. This will activate the overheat
safeguard system, thus leaving the blanket in-
operative, voiding all warranties.
• NOTE: No user serviceable parts inside. Unau-
    
the authorized service centre for replacement
or service under warranty.
FIRST USE:
• As most beds and beddings absorb moisture,
your electric blanket has to drive out this mois-
ture before being able to operate to its fullest
       
keep your electric blanket switched on at the
highest setting for 3-4 hours before going to
bed. You may notice a slight odour due to the
blanket’s newness, which is completely normal
and will quickly disappear.
• To connect the controller, keep the button on
the controller plug pressed while inserting the
plug into the socket. Release the button and
       
       
point and switch on (Fig. 2).
• 
outside the bed and away from open windows
or exposure to moisture.
USING YOUR ELECTRIC BLANKET
Heat Controller
• The 3-heat controller comes with an easily ad-
justable temperature slide switch and a heat
setting display.
• For maximum comfort, the 3-Heat controller
offers the following settings:
0 = Off
1 = Low Heat
2 = Medium Heat
3 = High Heat (Use for preheating the bed)
NORMAL DAY-TO-DAY OPERATION
WARNING: Do not use Setting 3 while you are
in bed.
Keep the controller on Setting 3 for 1-2 hours
before going to bed and then turn it down or off
altogether depending on your own requirements
whilst in Bed.
• Long term use setting ‘1’.
• Watchdog Safety Timer:
• The digital controller has 3-hour safety timers,
in case you forget to turn your blanket off after
your usage. The blanket will be automatically
switched off in 3 hours after the initial adjust-
ment was made to the controller.
• If the appliance is stopped in this way, set the
power switch to “0” position and then back to
the desired temperature
CLEANING
• Disconnect the appliance from the mains and
allow it to cool before undertaking any cleaning
task.
• Clean the electrical equipment and the mains
connection with a damp cloth and dry. DO NOT
IMMERSE IN WATER OR ANY OTHER LIQ-
UID.
• Clean the equipment with a damp cloth with a
few drops of washing-up liquid and then dry.
… 11 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Solac CT8624 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Solac CT8624 in the language / languages: English, German, Dutch, French, Italian, Polish, Portuguese, Spanish as an attachment in your email.

The manual is 1,29 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info