610553
11
Zoom out
Zoom in
Previous page
1/73
Next page
11
3. Start the unit by pressing the on/off switch (7) Fig. 7
4. Insert the body shaving head. During use, the shaving head must be in
permanent contact with the skin.
5. Slide the shaver in the direction opposite to the direction in which hair
grows, with a soft pressure. Fig. 8.
Recommendations: Pull your skin when moving the shaver on top of it and
let the shaver move smoothly with the exact pressure.
TO START CUTTING
The first time you use the appliance, cut a small amount of hair until you
get used to the length of each position. We recommend that you begin with
the maximum cutting length position (6 mm) and, in the event of wanting
a shorter cut, change to lower positions (4 or 2 mm).
Place the guide comb (4) on the head, attaching it to the two side sections Fig. 9.
To change the position of the cutting process, press the adjustment button
(5) up or down according to the desired position. Check the level selected
on the viewer (6) Fig. 10.
Turn the ON/OFF switch (7) to the ON position.
Cut the hair by moving the appliance in the opposite direction to that in
which the hair grows. Fig. 11.
Recommendations:
1. To cut the hair EVENLY, let the clipper ADVANCE SMOOTHLY through the
hair. Do not attempt to force it.
2. Before trimming, check that the appliance is clean and that there are no
traces of hair between the blades, as this could prevent it from working
properly. For this purpose, after removing the comb, clean the blade (2/3)
with the attached brush (12).
USE OF THE ERGONOMIC HANDLE
Use the ergonomic handle (14) for those areas that are hared to reach or for
smoother handling. Remove the trim (15) and insert the handle by pushing
in the two side sections. Fig. 12.
The handle can be extended, ideal for legs, or folded, for example, for use
on the back. Fig. 13.
To remove it, press the side sections and gently pull out. Insert the trim (15)
again. Fig. 14
HAIR LENGTH WITH THE COMB ACCESSORY
The comb accessory (3) allows you to set 3 different hair lengths:
Position 1: 2 mm approximately
Depilador CP7385 11 19/12/06, 16:12:25
11


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Solac CP7385 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Solac CP7385 in the language / languages: English, German, Dutch, French, Italian, Polish, Portuguese, Spanish as an attachment in your email.

The manual is 1,82 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info