Manual Solac CH6302 (page 7 of 48) (English, German, Dutch, French, Italian, Polish, Portuguese, Spanish)

719080

Zoom out

Zoom in

1/48

ENGLISH EN

cut. The appliance must be switched off be-

fore plugging or unplugging it into the mains

· Never pull the cord or use it to hang up the

appliance. Always unplug the appliance by

pulling the connection pin, and not the cord.

· Make sure the cord does not come into con-

tact with sharp edges or hot surfaces. Do not

leave the cord hanging over the edge of a ta-

ble or worktop, to prevent children from pulling

it and causing the appliance to fall.

· Remove all elements from the inside or outsi-

de of the appliance used for protection during

transport or for sales promotions, such as pa-

per or plastic bags, plastic sheets, cardboard

and stickers.

· Do not touch the appliance with wet hands

when in operation.

· Do not use the appliance on wet surfaces or

outdoors.

· Never leave the appliance outdoors exposed

to the elements.

· Before plugging in the appliance, check there

is milk or water in the container.

· The milk warmer is not suitable for use in the

microwave.

· The temperature of the milk warmer container

must be high when the appliance is operating.

Do not touch the metal parts of the milk war-

mer while it is operating.

· Do not use the appliance if it has fallen on the

oor, if there are visible signs of damage or if

it has a leak.

CAUTION! When you want to dispose of the

appliance, NEVER throw it in the rubbish bin.

Take it to the CLEAN POINT or waste collection

centre closest to your home for processing. You

will thus be helping to take care of the environ-

ment.

DESCRIPTION

MAIN PARTS

1 Casing

2 Handle

3 Lid

4 Mains connection pin

5 Cable connector

6 Connector input

7 Appliance base

8 On/Off SWITCH

USE

+ This appliance has only been designed for

warming milk and liquids, and for preparing

hot chocolate. Do not use it for any other

purpose.

+ Do not use the appliance to heat any other

type of liquids other than milk, water, coffee,

liquid or chocolate.

+ Completely remove all the elements inside

or outside the appliance that were used for

packing and transporting it.

1 Insert the cord connector (5) into the con-

nector (6) on the base (7) of the milk war-

mer.

2 Raise the lid (3) and pour the milk into the

milk warmer. The quantity of milk must be

between the MIN and MAX marks.

3 Plug the pin (4) into the mains.

4 Switch the appliance on by using the On/Off

switch

The pilot light will come on.

HEATING MILK

1 Wait a few minutes until the milk has rea-

ched the required temperature.

 We recommend keeping the lid closed while

the appliance is operating, to prevent skin

from forming.

+ Once the maximum temperature (80ºC) has

been reached, this temperature will remain

constant but without boiling.

PREPARING HOT CHOCOLATE

1 Break the chocolate up into pieces for better

dissolution.

2 Add the pieces of chocolate to the milk.

3 Stir gently from time to time using a wooden

spoon until an even mixture has formed. Do

not use abrasive products that could dama-

ge the coating.

4 Add more chocolate or milk to the mixture to

obtain thicker or thinner chocolate, depen-

ding on your preference.

CLEANING AND STORAGE

Never submerge in water to clean it.

+ Clean the appliance before using it for the

rst time, and after it has not been used for

some time.

+ Clean the milk warmer immediately after use

to prevent traces of milk or chocolate from

adhering to it.

1 Before cleaning the appliance: Stop the

CH6302_calientaleches3.indd 8 09/11/16 09:28

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Solac CH6302 in the language / languages: English, German, Dutch, French, Italian, Polish, Portuguese, Spanish as an attachment in your email.

The manual is 1,39 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Solac CH6302 Manual

Product: