Manual Solac CE4523 (page 11 of 71) (English, German, Dutch, French, Italian, Polish, Portuguese, Spanish)

799499

Zoom out

Zoom in

1/71

The lights will now ash sequentially. Press the tempe-

rature level you require:

1-Co󰀨ee - Low temperature

2-Co󰀨ees - Medium temperature

Steam - High temperature

Once the button is pressed, the 1-co󰀨ee button light will

ash quickly to conrm that the temperature has been

selected. The co󰀨ee maker will beep twice.

Programming water hardness

Access the programming menu.

Press the 2-co󰀨ee button to enter the water hardness

setting. The lights will show which level it is at:

1-co󰀨ee 2-co󰀨ees Steam Level

X Low water

hardness

X X Average

water

hardness

X X X High water

hardness

Once the level is shown, the lights will ash sequen-

tially.

Select the water hardness for your area based on the

following table:

Measurement Low

hardness

Average

hardness

High

hardness

German

degrees

<10º 10º - 20º >20º

French

degrees

<18º 18º - 36º >36º

mg CaCO3/L <180 180 -

360

>360

Once selected, the co󰀨ee maker switches back to Stan-

dby mode.

FACTORY SETTINGS RESET

Place a container under the steam pipe.

Access the programming menu.

Open the steam control fully.

Press the 1-co󰀨ee button. The buttons will all ash at

the same time, indicating that all values have been re-

set to the factory default settings.

The 1-co󰀨ee and 2-co󰀨ee buttons will ash to tell you to

close the steam control.

ONCE YOU HAVE FINISHED USING

THE APPLIANCE:

Turn the appliance o󰀨, using the on/o󰀨 switch.

Unplug the appliance from the mains.

Clean the appliance

SAFETY THERMAL PROTECTOR

The appliance has a safety device, which protects the

appliance from overheating.

When the appliance switches itself on and o󰀨 repeated-

ly, for reasons other than the thermostat control, check

to ensure that there are no obstacles that impede co-

rrect air entry or expulsion.

If the appliance turns itself o󰀨 and does not switch it-

self on again, unplug it from the mains supply and wait

approximately 15 minutes before reconnecting it. If it

fails to switch on again, take it to one of the authorised

technical assistance services.

AUTO-OFF FUNCTION

SOLAC machines are designed to save energy.

Consequently, the appliance switches o󰀨 automatically

30 minutes after the last operation.

To return to normal operation, simply press any button.

CLEANING

BETWEEN COFFEES

To enjoy the best co󰀨ee, we recommend always kee-

ping the co󰀨ee maker clean.

Empty the co󰀨ee out of the lter by giving it a sharp tap

or with the help of a spoon or utensil.

Clean the lter with warm water or with a ne

cleaning brush to remove any co󰀨ee remains.

Use a damp cloth to wipe the shower (the lter

holder support) to remove any co󰀨ee remains.

CAUTION: Make sure not to touch any of the

parts involved in the brewing (Filter, Shower) im-

mediately after making a co󰀨ee.

BASIC CLEANING

Unplug the appliance from the mains and let it cool be-

fore performing any cleaning task.

Clean the equipment using a damp cloth with a few

drops of washing-up liquid and then dry.

Do not use solvents or products with an acid or base

pH, such as bleach or abrasive products, to clean the

appliance.

Do not let water or any other liquid get in through the

air vents to avoid damaging the appliance’s internal

components.

The following parts are dishwasher safe:

- Water tank

- Drip tray

- Co󰀨ee lters

Next, dry all the parts before retting them and storing

the appliance.

Downloaded by: pd-oliana on 12-08-2022 14:11 CEST

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Solac CE4523 in the language / languages: English, German, Dutch, French, Italian, Polish, Portuguese, Spanish as an attachment in your email.

The manual is 1.11 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Solac CE4523 Manual

Product: