Manual Solac CE4505 (page 11 of 64) (English, German, Dutch, French, Italian, Polish, Portuguese, Spanish)

799493

Zoom out

Zoom in

1/64

CLEANING THE FROTHING WAND

- CAUTION! The frothing wand, and frothing

sleeve may be VERY HOT.

- -It is recommended to purge and wipe the

frothing wand after steaming milk to prevent

deposits of dirt and before turning off the

machine.

- To do this, pull the frothing sleeve down and

clean under warm running water.

- Fill a cup with a bit of water, immerse the froth-

ing wand into the water.

- Drain hot water through the pipe, following the

instructions "Obtaining hot water".

- Use a cloth to dry the frothing wand and re-

place the frothing sleeve.

- In case no steam comes out of the frothing

wand, hardened milk blocks its path. Carefully

use a needle to loosen the milk residue from

the opening of the frothing tip to remove any

blockage,

- -Once clean, rinse with running water from the

tap and reassemble it. Then steam again.

HOW TO DEAL WITH LIME SCALE

INCRUSTATIONS:

- For the appliance to work correctly it should be

kept free of lime scale or magnesium incrusta-

tions caused by the use of hard water.

- To prevent this kind of problem, we recommend

the use of water with low lime or magnesium

mineralisation.

- However, if it is not possible to use the kind of

water recommended above, you should period-

ically remove the lime scale from the appliance:

- Every 6 weeks if the water is “very hard”.

- Every 12 weeks if the water is “hard”.

- To do so, we recommend the use of the spe-

cic product Decal for this kind of machine,

which can be found in specialised shops and

authorised technical services.

- Homemade solutions are not recommended

in the de-scaling of this appliance, such as the

use of vinegar.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Solac CE4505 in the language / languages: English, German, Dutch, French, Italian, Polish, Portuguese, Spanish as an attachment in your email.

The manual is 1.41 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Solac CE4505 Manual

Product: