799493
8
Zoom out
Zoom in
Previous page
1/64
Next page
ENGLISH EN
COFFEE-MAKER
CE4502 - CE4503 - CE4504
CE4505 - CE4506
USE AND CARE:
- Fully unroll the appliance’s power cable before
each use.
- Do not use the appliance if its accessories are
not properly tted.
- Do not switch the appliance on without water.
- Do not use the appliance if the on/off switch
does not work.
- Do not move the appliance while in use.
- Respect the MAX and MIN levels.
- Disconnect the appliance from the mains when
not in use and before undertaking any cleaning
task.
- Unplug the appliance from the mains before
relling the water tank.
- Store this appliance out of reach of children
and/or persons with physical, sensory or
reduced mental or lack of experience and
knowledge.
- Do not store the appliance if it is still hot.
- Only use water with the appliance.
- The use of bottled mineral water adapted for
human consumption is recommended.
- Never leave the appliance connected and un-
attended if is not in use. This saves energy and
prolongs the life of the appliance.
- Do not remove the lter-holder when coffee is
being made, as at that time it is under pressure.
DESCRIPTION
A Water Tank Level
B Water tank
C Hot plate for warming cups
D Pilot light: ON/OFF
E Pilot light: Temperature
F ON/OFF Switch (Back of the machine)
G0 Central position (Stop)
G1 Coffee/Water Position
G2Heating for Steam position
H Function Selector knob
I Steamer/Hot water pipe
J Filter holder
K Measuring spoon
L Filter for single measure (or POD)
M Ground coffee lter (2 cups)
N Supply cable
O Drip tray
P Silicone tubes
R Steam/Water Knob
INSTRUCTIONS FOR USE
BEFORE USE:
- Make sure that all the product’s packaging has
been removed.
- Remove the protection of the suction tubes
from the tank, at the rear of the machine. All
machines have been tested with water, that
protection is to prevent dripping during trans-
port.
- Before using this product for the rst time, it is
advisable to test it only with water.
- Before using the product for the rst time, clean
the parts that will come into contact with food in
the manner described in the cleaning section.
- Before connecting the machine, check that
Steam/Water Knob (R) is closed.
PRIMING THE CIRCUIT
This simple operation ensures optimum dispens-
ing and must be carried out:
- When rst starting.
- When the machine remains a long period with-
out being used (1 or 2 weeks).
- After obtaining steam.
- When the tank has run out of water.
- Fill the receptacle taking care to observe the
MAX level.
- Connect the appliance to the mains.
- Push the ON/OFF switch (F) on the back of the
machine.
- The (D) pilot light will light, indicating that ma-
chine is connected.
- You do not must wait for the machine to heat
up for this operation.
8


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Solac CE4505 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Solac CE4505 in the language / languages: English, German, Dutch, French, Italian, Polish, Portuguese, Spanish as an attachment in your email.

The manual is 1.41 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info