718607

Solac CE4480 Manual

12
Zoom out
Zoom in
Previous page
1/79
Next page
EN
- Before using the product for the first time, clean
the parts that will come into contact with food in
the manner described in the cleaning section.
Priming the circuit: This simple operation
ensures optimum dispensing and must be
carried out:
- When first starting:
- When the machine has been out of use for a
long time (1 or 2 weeks)
- After making steam
- When the tank has run out of water.
- Fill the receptacle taking care to observe the
MAX level
- Connect the appliance to the mains.
- Press the on/off switch (F) to ON position. The
(D) pilot light will come on
- You do not have to wait for the machine to heat
up for this operation
- Without fitting the filter holder (or with the filter
holder fitted, but without coffee), place a
recipient under the steam pipe (I)
- Open the steam knob (Q) by turning
counterclockwise.
- Press the coffee switch / water (G) to on
position
- Water will exit through the steam pipe. Wait
until approximately one cupful has exited
- To finish serving, back coffee / water switch to
OFF position and close the steam knob (Q) by
turning clockwise This will complete the priming
operation.
FILLING WITH WATER:
- The deposit must be filled with water before
turning the appliance on.
- Remove the water tank.
- Open the cover.
- Fill the deposit taking care to observe the MAX
level (Fig. 1)
- Close the lid.
- Replace the tank in its housing, ensuring that it
is well fitted.
PREPARING COFFEE:
- Before connecting the machine, check that the
buttons (F, G) are not pressed, and steam
control (Q) is closed
- Connect the appliance to the mains.
- Remove the filter holder.
- Position the ground coffee filter (M) filter holder
- We recommend using natural toast coffee, as
using roasted coffee may affect the operation
of the machine.
- Fill the removable filter with ground coffee (6-7
g per cup to be prepared).
- If you wish to make 1 coffee, fill the ladle (1
spoonful) and take the capacity of the
measuring spoon measure for one coffee until
half its capacity.
- For 2 coffees, put in 2 spoonfuls.
- Next lightly press down the ground coffee with
the back of the spoon.
- Before fitting the filter holder in the coffee-
maker assembly, turn the ladle-holder
backwards. - Fit the filter holder in the
appliance once more.
- Position the filter holder in the coffee assembly
by inserting the assembly downwards and
turning it from left to right until it locks.
- Insert the filter holder with coffee into the
appliance
- Turn it anticlockwise until it is in the locked
position.
- Turn the appliance on using the on/off switch
(F)
- The (D) pilot light comes on.
- Wait until the pilot light (E) is lighting
- Place one or two pre-heated cups at the filter
holder outlet.
- Press the coffee switch (G) to the ON position
The coffee infusion will begin to exit. When you
have obtained the desired quantity of espresso
coffee (short or long), come back switch to OFF
position
- Once serving has finished, wait a few seconds
and remove the cups with the coffee.
- Remove the filter holder and empty the
grounds from it.
- Wash the filter holder with running water and
dry it well.
- Check that the removable filter is perfectly fitted
into the filter holder.
- Fit the filter holder in the appliance once more.
GETTING HOT WATER:
- Put The device in ON situation, pressing the
knob ON/ OFF (F)
- The Heating indicator light (D) will illuminate
indicating that the water is heating up.
10
… 12 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Solac CE4480 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Solac CE4480 in the language / languages: English, German, Dutch, French, Italian, Polish, Portuguese, Spanish as an attachment in your email.

The manual is 3,38 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info