Manual Solac CA4810 (page 8 of 44) (English, German, Dutch, French, Italian, Portuguese, Spanish)

718606

Zoom out

Zoom in

1/44

ENGLISH EN

Automatic Espresso machine

CA4810

USE AND CARE:

- Do not use the appliance if its accessories are not properly tted.

- Do not switch the appliance on without water.

- Do not use the appliance if the on/off switch does not work.

- Do not move the appliance while in use.

- Respect the MAX level

- Disconnect the appliance from the mains when not in use and before

undertaking any cleaning task.

- Unplug the appliance from the mains before relling the water tank.

- Store this appliance out of reach of children and/or persons with physi-

cal, sensory or reduced mental or lack of experience and knowledge.

- Do not store the appliance if it is still hot.

- Only use water with the appliance.

- The use of bottled mineral water adapted for human consumption is

recommended.

- Never leave the appliance connected and unattended if is not in use.

This saves energy and prolongs the life of the appliance.

GET TO KNOW YOUR AUTOMATIC COFFEE MACHINE

GENERAL DESCRIPTION

1 External Drip Tray

2 External Drip Tray Cover

3 Internal Drip Tray

4 Coffee Grounds Container

5 Metal tube

6 Steam Nozzle

7 Nozzle cover

8 Steam indicator light

9 Adjustable coffee spout

10 Control Panel

11 Coffee Bean Container

12 Coffee Beans Container Cover

13 Cup Lighting

14 Water Tank

15 Power cord

16 Service Door

17 Brewer

18 Cleaning brush

CONTROL PANEL

A Flashing: Low water level/ Water tank missing (14)

B Lack of bean

C Steadily lights up: Coffee grounds container (4) is full

Flashing light: Internal Drip Tray (3) /Coffee grounds container is

missing (4)

D Steadily lights up: Brewer is missing (17)/ Installed improperly

Flashing light: Service door (16) is opened / Installed improperly

E Steadily lights up: Requires descaling

Flashing light: Descaling is under process

F Empty System Function is running

G Power ON/OFF Button

H Steam button

I Hot Water Button

J Strong Coffee Button

K Mild Coffee Button

L Favourite Function Button

ACCESSORY

- In the box are included:

- Packs of cleaning agents for the process of self-cleaning.

- Cleaning cloth for Control panel.

- Cleaning brush.

MACHINE INSTALLATION

- Remove any protective lms, stickers and any other packing material

on the appliance.

- Choose a safe and stable surface with an easy to reach power supply

and leave space (minimum distance from each side) around the machi-

ne.

- Insert the external drip tray (1).It has magnets to facilitate assembly.

Make sure it is inserted correctly.

- Fill the water tank (14) with water (see “FILLING THE WATER TANK”).

- Fill the bean box (11) with coffee bean (SEE “FILLING THE COFFEE

BEAN CONTAINER).

- Unwind and straighten the power cord and insert the plug into the

socket located on the back of the machine. Insert the other end of the

power cord into a wall socket with suitable power voltage.

DAILY OPERATION

MAKING YOUR COFFEE

- Switch on the appliance by pressing the power on/off button (G).

- The appliance will rinse itself when turned on and when turned off and

when it turns itself off automatically. Place an empty container under

the adjustable coffee spout before turning on or off.

OPTION CANCELLATION AUTOMATIC CLEANING:

As you can always do Cleaning Manually (see MANUAL RINSING), if

you consider the AutoClean option annoying, you can override that

function as follows:

Open and remove the Service Door (16) (See Figs 2 and 3)

Press and hold the ON / OFF button for a few seconds until 2 beeps

are heard.

That indicates that you have disabled self-cleaning

To reactivate it, repeat operation, until you hear the double beep

- The appliance is then in the standby condition.

- Place a cup under the coffee spout (9) and adjust the height of the

spout the t the cup. Depending on the size of the cup (too tall or too

wide) you can remove the drip tray (1) or adjust the position of the drip

tray as showed in (Fig 1).

- Depending on the taste of coffee you would like to have, press strong

coffee button (J) or mild coffee button (K).

- The coffee button being pressed will light on and continue to be lit indi-

cating that the appliance is preparing the cup of coffee.

- While it is brewing, the cup lighting (13) will activate.

- When the appliance is back to standby condition, the coffee is ready to

serve.

Tip: the strong coffee button (J) with higher coffee intensity which

recommend for espresso, while both coffee button volumes (J, K, L)

can be adjusted (see Section FURTHER SETTING / Volume of Coffee

and Water)

Note: Press the hot water button (I) (see Section HOT WATER) to

clean inside of the coffee maker before rst use.

FILLING THE WATER TANK

- When (A) Icon is ashing, the water tank (14) is in low water level and

requires lling the water tank.

- Lift the water tank (14) by using the lid as the handle.

- Rinse the water tank with fresh water and then ll the tank to the Max

level and place it back into the machine. Make sure it is fully inserted.

Note: To prevent overow of water from the water tank, do not add

water directly into the appliance with another container.

IMPORTANT: Never ll the water tank with warm, hot, sparkling

water or any other liquid which might damage the water tank and the

machine.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Solac CA4810 in the language / languages: English, German, Dutch, French, Italian, Portuguese, Spanish as an attachment in your email.

The manual is 3,08 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Solac CA4810 Manual

Product: