610331

Solac BA5510 Manual

11
Zoom out
Zoom in
Previous page
1/58
Next page
11
OPERATION
USE WITHOUT SUPPORT
A. FITTING THE RODS
• Before plugging the appliance into the mains, you should fit the appropriate
attachments depending on what kind of mixing you want to do:
- Mixer rods
(9): For liquid mixes such as creams, egg whites, pastry mixes,
etc.
Fit 1 or 2 rods (9) in the coupling holes (4) by pushing them gently up
until they are fully engaged (fig.1).
- Blender rods
(8): They are used for mixing light doughs.
• IMPORTANT: The blender rod with the metal washer should be inserted in
the wide hole (fig.2).
• When the attachments you are going to use have been set in place, plug
the appliance into the mains.
B. OPERATION
• Pick up the mixer and use your thumb to slide the selector (7) to the desired
position (fig.3):
- Position 0: Off
- Position 1-2: Low speed
- Position 3-4: Medium speed
- Position 5: High speed
• We recommend starting off at low speed and gradually increasing. For heavy
or thick mixes you should use high speed (nº 5) right from the start to pre-
vent the motor from locking.
• Make sure that the rods can turn perfectly inside the receptacle.
• The TURBO button (6) enables you to use the mixer at the highest speed
possible for a few seconds. For this purpose, with the speed selector (7) at
the desired position, keep the button (6) pressed for as long as you want it
to operate (maximum 30 seconds) (fig.4).
• When you finish mixing or want to interrupt the process, set the selector
(6) at position 0.
• To remove the rods (8 or 9) from the main body (1), press the release but-
ton (5) (fig.5).
• Do not press the button (5) while the appliance is working, as the rods
would drop out.
• When the process is concluded, unplug the appliance from the mains.
• The turbo cannot be switched on in position 0 for safety reasons.
11
5510 BATIDORA 11 20/1/05, 09:59:28
… 11 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Solac BA5510 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Solac BA5510 in the language / languages: English, German, Dutch, French, Italian, Polish, Portuguese, Spanish as an attachment in your email.

The manual is 0,68 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info