610329
12
Zoom out
Zoom in
Previous page
1/71
Next page
12
The vacuum cleaner can now be plugged in. To do so, pull out the cord and
press the button (6) to switch it on. A yellow mark on the cable indicates
the ideal length of the cable.
The suction power can be adapted to the surface to be vacuumed. The suc-
tion power can be adjusted mechanically by opening or closing the mecha-
nism on the handle (11) or by means of the electronic power regulator (2).
Never wash the HEPA filter or any of the other filters in the washing ma-
chine.
If you wish, use the handle (3) to carry the vacuum cleaner while using it
to get into difficult places. The protective rubber wheels, the carrying handle
and the vacuum cleaners compact size make it extremely easy to move
around.
When finished, switch the appliance off by pressing button (6). Unplug it
and press button (1) to wind up the cord. Hold the cord plug in your hand
to prevent it from banging against the vacuum cleaner housing.
For storage, place upright and insert the clip on the telescopic tube (13) into
one of the slots on the bottom of the vacuum cleaner. (Fig. 1)
CLEANING THE DUST CONTAINER:
NOTE: Before starting to clean the container, make sure you have un-
plugged the appliance.
Once you have finished using the appliance, we recommend cleaning the
container (7), the metallic cyclone filter (19) and the HEPA filter (21).
The dust container should be emptied when the dust collected in the con-
tainer reaches maximum capacity level (20). The container full pilot light (22)
may come on at times if something becomes lodged in the flexible tube,
suction opening or accessory. To find out if that is the case, unplug the
vacuum cleaner, remove the flexible tube, and turn the vacuum cleaner on
again. If the pilot light does not come on, clean the flexible tube and its
attachment.
When you need to empty the dust container, disconnect the appliance and
proceed as follows:
1. To remove the dust container (7) pull up the container handle (8) while
pressing the container removal button (16) (fig. 2)
2. Place the container over the rubbish bin.
3. To open the container, press the automatic opening button (17) and
empty the dust into the rubbish bin (fig. 3).
4. To close the container, move the bottom cover of the container (18) forward
and press it upwards until you hear a click that indicates that the con-
tainer cover is closed correctly (fig. 4).
5. Place the dust container back in the vacuum cleaner and push the con-
tainer flush against the bottom until you hear a click, which means it is in
the correct position (fig. 5).
12


Need help? Post your question in this forum.

Forumrules
1

Forum

solac-as3190

Reset search

  • How can I buy filters for a Solac AS3190 vacuum cleaner? Submitted on 13-2-2017 at 20:52

    Reply Report abuse


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Solac AS3190 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Solac AS3190 in the language / languages: English, German, Dutch, French, Italian, Polish, Portuguese, Spanish as an attachment in your email.

The manual is 0,7 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info