488734
12
Zoom out
Zoom in
Previous page
1/78
Next page
12 USER INSTRUCTIONS
, Uncharge the batteries completely now and then for maximum
performance.
3 USER INSTRUCTIONS
1 Insert the handle (1) in the opening on the main body of the broom (3)
and fasten both parts together by tightening the fastening screw (15) with
a coin. (Fig. 2).
2 Make sure the dust canister (6) and filters (9 and 10) are installed
correctly. See the section titled Cleaning the dust canister and filters.
3 Insert the multi-purpose brush (11) into the suction nozzle and press it in
until you hear a click. To remove the brush, gently press the multi-
purpose connection/disconnection button (12) and pull it out. (Fig. 3).
, The multi-purpose brush (11) is ideal for vacuuming all kinds of floors,
carpets and rugs.
4 To turn the broom on, slide the on/off button (2) down.
5 Once you have finished cleaning, turn the broom off by sliding the on/off
button (2) up.
) Important: After each use, place the broom on the charger (13) to keep
the suction power at peak level. This makes sure the battery is fully
charged ready for the next time it is used.
CLEANING THE DUST CANISTER AND FILTERS
n Befote starting to clean and maintain the appliance, make sure you have
unplugged the appliance.
) When the dust stored in the canister reaches the maximum level mark
(8), you should empty the canister. To ensure the continued top-quality
performance of your appliance, we recommend cleaning the canister
and filters after each use.
When you need to empty the dust canister, disconnect the appliance and
proceed as follows:
1 Press the canister removal button (7) upwards and remove the canister.
(Fig. 4).
2 Remove the filter (10) by holding the canister and pulling the filter tab
out. (Fig. 5). Shake the filter out in the rubbish bin or use a brush to clean
it.
3 Remove the protection filter (9) by pulling it upwards. (Fig. 6). Shake the
filter out in the rubbish bin, banging it lightly against the sides of the bin
until no more dust falls off.
12


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Solac AE2510 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Solac AE2510 in the language / languages: English, German, Dutch, French, Italian, Polish, Portuguese, Spanish as an attachment in your email.

The manual is 0,59 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info