799397

Solac AE2502 Manual

10
Zoom out
Zoom in
Previous page
1/56
Next page
socket on the appliance. The socket is located
at the lower part of the handle where you can
nd the battery. (Fig. 1)
- The pilot light will come on to indicate that the
charger is charging the battery.
- When the battery is charged disconnect the
charger from the mains supply.
- NB: Do not use the appliance while it is con-
nected to the charger.
HOW TO CHECK THE BATTERY’S CHARGE
LEVEL:
- Turn on the vacuum cleaner with the ON / OFF
button during 1 second.
- If no pilot light lights up, this means that the
battery is completely at.
- NB: For a long battery life, it is advisable to
charge the battery, only, when it has run out
completely.
INSTRUCTIONS FOR USE
BEFORE USE:
- Make sure that product’s packaging has been
removed.
- Before using this product for the rst time, it is
important to make a full charge of batteries.
- Prepare the appliance according to the function
you wish to use:
USE:
- Turn the appliance on, by using the on/off
button during 1 second.
- The pilot light comes on.
- To select the TURBO speed press twice on the
ON / OFF button
- IMPORTANT: To turn the appliance on, press
the ON / OFF button for 1 second.
FITTING AN ACCESSORY TO THE HAND
VACUUM OR TO THE ALUMINIUM EXTENSION
TUBE:
- The hand vacuum is designed in such a way
that it allows the following accessories to be
tted: (use the combination that best meets
your requirements). (Fig.2).
- Brush nozzle: equipped with a brush on its tip
that allows brushing the surface while acting.
- Nozzle 2 in 1 lance / brush: Especially indicat-
ed for slots and corners of difcult access.
- Motorized brush: You can use any type of sur-
face: parquet, tiles, carpets and carpets.
ONCE YOU HAVE FINISHED USING THE
APPLIANCE:
- Stop the appliance by pressing the ON / OFF
button twice if you are using the vacuum clean-
er at ECO speed or once if you are using the
vacuum cleaner at TURBO speed.
- Remove the battery from the appliance if you
are not intending to use the appliance during
an extended period.
- Clean the appliance.
CLEANING
- Disconnect the battery charger from the mains
and allow it to cool before undertaking any
cleaning task.
- Clean the equipment with a damp cloth with a
few drops of washing-up liquid and then dry.
- Do not use solvents, or products with an acid or
base pH such as bleach, or abrasive products,
for cleaning the appliance.
- Never submerge the appliance in water or any
other liquid or place it under running water.
EMPTYING THE DUST BOX
- Empty the dust box when it is full (observation
facilitated by transparent windows), or when
vacuuming power is notably reduced.
- Open the lid of the dust box and empty the
contents into the appropriate waste disposal
receptacle. (Fig.3)
- Check the condition of the cyclone.
- Close the lid of the dust box.
CHANGING THE FILTERS:
- Dust tank HEPA lter (high efciency air lter
that efciently retains spores, ash, sawdust,
pollen…), it is advisable to change it a least
once a year or after every 50 hours of use, or if
its potency diminishes remarkably.
- Air outlet lter, it is advisable to be changed
at least once a year or every 100 hours of the
appliance’s use.
TO REMOVE THE FILTERS:
- Turn the lower part of the tank clockwise and
pull outwards. (Fig.4)
- Remove the cyclone located inside the tank by
… 10 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Solac AE2502 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Solac AE2502 in the language / languages: English, German, Dutch, French, Italian, Polish, Portuguese, Spanish as an attachment in your email.

The manual is 1.28 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info