610318

Solac AB2821 Manual

13
Zoom out
Zoom in
Previous page
1/74
Next page
CLEANING AND CONSERVATION 13
en
2 To change the dust bag (7), unplug the vacuum cleaner and proceed as follows:
• Press the dust bag button (5) and lift the cover.
• Remove the dust bag frame completely (8), pressing on the tab that holds the bag in
place to release it and put it in the rubbish bin. Fig. 4
3 Insert the new bag into the frame (8). Clip the card on the new bag with the tab. Slide
the bag frame along the bottom guide as far as possible. It is very important for the bag
to be fitted correctly. Make sure that once the bag has been fitted in the frame the hole
in the bag coincides completely with the bag support hole. Fig. 5
4 Close the bag compartment cover.
The vacuum cleaner is fitted with a safety mechanism that prevents the top cover from
closing if no dust bag has been fitted or if it is fitted incorrectly. In this case, it is
important not to force the cover.
FILTER CLEANING AND REPLACEMENT
We recommend that you periodically check the air filters to make sure that they
work correctly. Clean the filters if you detect that the appliance’s suction
capacity has decreased.
Changing the motor protection filter (9)
Always unplug your vacuum cleaner before cleaning or changing the filters.
1 When the motor protection filter (9) is dirty (once or twice a year, depending on use),
open the vacuum cleaner, pressing the dust bag button (1), and lift the cover.
2 Remove the filter (9) by pulling the top upward. Shake the motor protection filter (9) well
or wash it if it is very dirty, and allow it to dry completely. Fig. 6
Important: Do not use the vacuum cleaner without the motor protection filter or if the
motor protection filter is not completely dry under any circumstances.
Changing the air outlet filter (16)
Always unplug your vacuum cleaner before cleaning or changing the filters.
Depending on the model of your vacuum cleaner, it has a different air outlet filter fitted
as standard:
- HEPA filter.
The HEPA filter (high efficiency of micro-particles in the air) eliminates particles of more
than 0.3 microns, filtering dust, pollen, fumes, spores and even bacteria.
- Micro-filter.
1 It is important to change or clean the air outlet filter at least once a year to maintain
suction power and conserve the vacuum cleaner correctly. You can note down the date
on which you began to use the filter on the air outlet filter support. There is a space for
this purpose on the filter support itself.
2 To remove the air outlet filter (16), remove the air outlet grille by pressing the tab down
and pulling the filter out. Fig. 7
Important: Do not use the vacuum cleaner without the dry air outlet filter fitted under
any circumstances.
CLEANING THE APPLIANCE
Clean the appliance before using it for the first time, immediately after each use and
after not using it for a long period of time. You will thus ensure the correct operation of
the appliance and prolong its useful life.
Before cleaning the appliance, unplug it from the mains.
Check that no water gets into the appliance.
1 Clean the outside of the appliance with a damp cloth. Do not use any abrasive products
or solvents.
Beagle.book Page 13 Thursday, August 6, 2009 9:02 AM
… 13 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Solac AB2821 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Solac AB2821 in the language / languages: English, German, Dutch, French, Italian, Polish, Portuguese, Spanish as an attachment in your email.

The manual is 2,15 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info