610314
13
Zoom out
Zoom in
Previous page
1/86
Next page
13
en
Cleaning and Maintenance
4 Cleaning and Maintenance
Changing the dust-bag (19)
When the indicator (17) is completely red, a new paper bag must be
installed in the vacuum cleaner.
This indicator may show red if something is stuck in the flexible hose or
in an attachment. To find out if that is the case, unplug the vacuum
cleaner, remove the flexible hose, and turn the vacuum cleaner on again.
If the indicator does not show red, clean the flexible hose and its
attachment.
To change the paper bag, unplug the vacuum cleaner and proceed as
follows:
1 Open the bag compartment by pressing on the latch (4) and lifting the
cover (fig. 1).
2 Remove the plastic base (20) and the bag (19).
3 Press the tab (21) and separate the base while holding the bag by the
carton (fig. 4). Do not crumple the bag, as this may expel the dust inside.
4 Place the new paper bag inside the plastic base (20) and lower the notch
(22).
5 Place the base with the new bag (fig. 5) in the compartment and make
sure that it fits tightly.
6 To close the compartment (2), lower the cover and press down on the
opening space with your hand (1), until you hear a click (fig. 2).
It is very important that the bag be placed correctly.
Changing the motor protection filter (23)
We recommend that you check the motor protection filter regularly to
make sure that it works properly. This will rule out that poor placing of the
filter or of the dust-bag, or tears or leaks in the bag obstruct the appliance
and reduce suction capacity.
Replace the motor protection filter every 6 changes of the dust-bag.
1 Open the dust-bag container by pressing on the latch (4), and lifting the
cover (fig. 1).
2 Remove the plastic base (20) and the bag (19).
3 Remove the filter by pulling the top upward (fig 6).
4 Insert the new filter, making sure that it is properly placed and fits tightly
in the top rubber seal.
UntitledBook1.book Page 13 Thursday, July 12, 2007 6:08 PM
13


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Solac AB2650 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Solac AB2650 in the language / languages: English, German, Dutch, French, Italian, Polish, Portuguese, Spanish as an attachment in your email.

The manual is 2,73 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info