598113

Solac AA3400 ECOGENIC Manual

24
Zoom out
Zoom in
Previous page
1/146
Next page
24
STORAGE AND STORAGE
For best performance of the robot vacuum, we recommend that you clean the dustbin and
clean the filter after every 3 uses.
EMPTYING THE DUSTBIN (11)
1 Keep the release button (12) pressed down. Remove the dustbin (11). (fig. 8)
2 Place the dustbin over a rubbish bin, pull the tab (14) to open the filter holder and empty
the contents into the rubbish bin. (fig. 9)
FILTER CLEANING AND REPLACEMENT (7)
) It is advisable to inspect the filter regularly, to check that it is working properly.
Clean the filter thoroughly if you detect a reduction in the appliance’s vacuuming
capacity.
) It is advisable to replace the filter once or twice a year, depending on how often the
appliance is used.
1 Empty the dustbin as shown in the “EMPTYING THE DUSTBIN (11)” section.
2 Remove the filter (7). Press the semi-circular holder with one hand to remove the used
filter from the holder (fig. 10)
3 Gently shake the removed filter against the side of the rubbish bin to dislodge excess
dust and dirt.
) Never use the robot vacuum without the filter (7).
4 Clean the filter using the cleaning brush (6) (fig. 11).
5 Return the clean filter, or new filter if necessary, to its holder.
CLEANING THE DUSTBIN (11)
1 Press the button (13). This releases the vacuum module (15) (fig. 12).
2 Turn the vacuum module round, release the two tabs and remove the lid.
3 Clean the interior of the bin using the cleaning brush (6) (fig. 13).
4 Use the cleaning brush to clean the vacuum module (15) and the air intake and outlet
unit (fig. 13).
) Do not clean the vacuum module with water.
5 Fit the dustbin into the body of the appliance. Press on the bin until you hear a click,
which indicates that it is properly fitted to the body.
MOP CLEANING AND REPLACEMENT (9)
) Do not use the mop on rugs, carpets or floors that are not completely smooth.
1 In such cases, remove the mop attachment (10). Turn the mop attachment and undo
the left and right tabs (fig. 14).
2 To replace the mop (9), pull it out and put a new one in its place (fig.14).
REMOVAL AND CLEANING OF BRUSHES
For best performance of the robot vacuum, we recommend that you clean the rollers and
brushes after every 3 uses.
Rollers (22) and (23)
1 Push the tab back and lift and fastening bar (fig.15).
, The rollers will be released.
2 Remove the rollers (22) and (23).
3 Clean the rollers using the cleaning brush (6) (fig.16).
4 Re-insert the rollers and replace the fastening bar, pressing it until you hear a click,
which indicates that it is fitted properly
… 24 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Solac AA3400 ECOGENIC at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Solac AA3400 ECOGENIC in the language / languages: English, German, Dutch, French, Italian, Polish, Portuguese, Spanish, Spanish as an attachment in your email.

The manual is 2,59 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info