598113

Solac AA3400 ECOGENIC Manual

21
Zoom out
Zoom in
Previous page
1/146
Next page
VIRTUAL BARRIER 21
en
, If you wish, you can control its movements or functions using the remote control buttons
(please refer to the “REMOTE CONTROL” section), or using the buttons of the control
panel on the robot vacuum's body.
, Press the UV key, if you want to sterilise the front area.
This function is particularly recommended for people suffering from allergies and for
homes with pets, as it sterilises the floor against viruses and bacteria.
8 Press the button again to pause the cleaning process.
9 If you do not want a programmed weekly clean, turn off the appliance after cleaning.
To do so, set the operating switch (20) to the OFF position or press the ON/OFF button
on the remote control.
10 Unplug the charging station from the mains.
VIRTUAL BARRIER
MAIN COMPONENTS (B)
OPERATION
, Use the virtual barrier to define the desired cleaning area, preventing the robot from
entering unnecessary or unwanted areas.
Use this to prevent the robot entering areas with cables or a particular room.
) Place the virtual barrier at the same level on the surface where you are going to use
the robot vacuum.
) Place the virtual barrier and the charging station at a distance of more than 3 m apart,
to prevent interferences.
) Do not place the charging station within range of the virtual barrier’s signal.
, The proximity sensor head (3B) prevents impact between the robot vacuum and the
virtual barrier, preventing it from coming within a distance of less than 0.5-1 m from it.
1 Make sure that the batteries are not discharged.
2 Position the virtual barrier so that it blocks the area you do not want the robot vacuum
to enter. (fig. 3).
3 Remove any objects that may be in front of the virtual barrier, to prevent its inadequate
operation.
4 Choose the desired length of the virtual barrier. To do so, set the switch (B) to choose
short , medium or long range.
, Use the appropriate barrier length. The battery’s duration depends on the selected
sensor distance.
, The LED ON light (2B) will flash every 8 seconds until the battery runs out.
5 Check that the robot vacuum cannot cross the boundary created by the virtual barrier.
6 Set switch (B) to the OFF position , when the virtual barrier is not required.
, Some differences may occur in the direction of the virtual barrier’s infrared signal and
the robot's reception range, due to the movement of the robot during while in use. This
difference may vary depending on the work environment and the charging level of the
robot and the virtual barrier.
1B ON switch & Length of virtual
barrier
2B LED ON light
3B Proximity sensor head
4B Virtual barrier sensor head
5B Battery compartment cover
6B Battery cover clip
Off
Short range = 4 m
Medium range = 6 m
Long range = 8 m
… 21 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Solac AA3400 ECOGENIC at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Solac AA3400 ECOGENIC in the language / languages: English, German, Dutch, French, Italian, Polish, Portuguese, Spanish, Spanish as an attachment in your email.

The manual is 2,59 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info