798361

Sogo SS-7705 Manual

12
Zoom out
Zoom in
Previous page
1/36
Next page
12
español english français portuguese italiano deutsch
PART IDENTIFICATION
BEFORE USING
● Read the important safeguards and
Caution.
● Fill kettle up to the MAX WATER MARK
and let the water boil, pour the water, cool
the kettle and repeat for at least 3 times
before using.
HOW TO USE
1. Place the water kettle upright on a dry,
sturdy andat surface.
2. Remove the kettle from the base. Open
the lid by pressing the safety lock of lid.
Fill the kettle with fresh water through the
spout, make sure that the water level pass
the minimum level (0.5 Litre) and does not
exceed the maximum level (1.7 Litre).
Before closing the lid and placing it back
to the base, ensure that the kettle has not
yet been switched on (“I” position).
3. Dry the water on the bottom of the body
if it is wet, then place the kettle securely
back to the base. Insert the plug into a
suitable socket and switch the kettle to the
“I” position. The power indicator will be
on.
4. After reaching the boiling point, the kettle
will be shut off automatically by the safety
cut-out function.
5. To pour hot water, remove the container
from the base, ensure the lid remains
closed while pour out the water.
6. You may also shut the kettle off at any
time by pressing the “on/off” switch to the
“0” position. After the boiling is nished,
allow the kettle to cool down for 15
minutes before relling cold water.
WARNING:
DO NOT IMMERSE IN WATER!
To protect from Electrical hazard, do not
immerse this Kettle, its power base or its
cord set in any liquid.
CLEANING
Always disconnect the appliance from
the power outlet and cool it down
completely before cleaning.
Never immerse the kettle, power cord or
power base in water, or allow moisture
to contact with these parts.
Wipe the appearance of body with a
damp cloth or cleaner, never use a
poisonous cleaner.
CAUTION: Do not use chemical, steel,
wooden or abrasive cleaners to clean
the outside of the kettle to prevent
the loss of gloss.
Descaling the kettle
Please follow all instructions on descaling
products carefully.
1. Fill the kettle with water up to half of
the maximum level; add about two
tablespoons of vinegar into the water.
2. Switch the Kettle on and let the solution
reach boiling point.
3. Leave the solution in the kettle for a few
minutes
4. Empty the kettle, wash it with clean water.
5. After rinsing, ll the kettle with clean
water and bring to the point of boil for one
more time
6. If limescale is still present in kettle, repeat
this process
TECHNICAL SPECIFICATION:
Model No.: SS-7705
Voltage / Frequency: 220 - 240V ~ 50/60Hz
Power Consumption: 1830W
Capacity: 1.7L
1.Spout
2.Safety lock for lid
3.Lid
4.“On/off” switch
5.Body
6.Handle
7.Power Indicator
8.Base
9.Power cord & plug
… 12 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Sogo SS-7705 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Sogo SS-7705 in the language / languages: English, German, French, Italian, Portuguese, Spanish as an attachment in your email.

The manual is 3.91 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info