Manual Sogo SS-5675-R (page 24 of 76) (English, German, French, Italian, Portuguese, Spanish)

797957

Zoom out

Zoom in

1/76

español english français portuguese deutsch italiano

ENERGY SAVING MODE

The machine enters energy saving model automatically once the machine is idle for 15 minutes, the

back light of two buttons and power indicator will switch o󰀨. To quite energy saving mode, please

press power button, appliance will start to warming up with lights blinking, when the buttons are lit

steadily, the machine is ready to brew co󰀨ee.

DECALCIFICATION

Decalcication/Maintenance

Drinking water varies according to region. The lime particles in hard drinking water are deposited as

residues in the machine and can block the piping and cause damage to it. To prevent this, make sure

to decalcify the machine at the very least after making 300 to 400 cups of co󰀨ee or in any case if the

output falls signicantly, after one or two months. Decalcication must be done correctly to prevent

damage. So, it is essential to follow these instructions.

Important:

– Never clean the machine with vinegar. This causes damage and makes your co󰀨ee taste bad.

– Damage caused by incorrect decalcication or failure to decalcify is not covered by the guarantee.

– Caution: beware of hot water!

1. Recommendations: purchase commercially available decalcier (decalcifying liquid), diluted

according to the manufacturer‘s instructions; pour the mixture in the water tank

2. Make sure there is without capsule inside the machine.

3. Place a large bowl under the dispensing head to collect the decalcication diluted and lime

residue.

4. Fill the water tank with water to maximum level mixed with decalcifying solution, make sure the

solution is dissolved completely.

5. Press the large button to run decalcifying water as you brew co󰀨ee normally, repeat for several

times to run out the entire tank water.

6. Repeat the process to run another tank of water mixed with decalcifying solution.

7. Repeat the process to Flush out the intern circuit with a tank of fresh water (without the

decalcifying solution) to clean the internal circuit completely.

INDUCING THE WATER, MANUALLY INTO COFFEE MACHINE AND PUMP

The very rst time or after long pauses (e.g. holidays) the machine might not pump the water. So

Before using the machine again this short procedure of inducing the water manually into the machine

using the pipe, helps pump and internal circuit to self-priming.

Insert the pipe into the water entrance located underneath water tank.

Fill water into the pipe.

Push manually with the help of pusher to introduce the water into the machine, so that the internal

circuit get lled with water.

After doing steps mentioned above machine will be able to pump the water on its own.

Note: If necessary, repeat the process for 2-3 times.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Sogo SS-5675-R in the language / languages: English, German, French, Italian, Portuguese, Spanish as an attachment in your email.

The manual is 2.31 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Sogo SS-5675-R Manual

Product: